Grove DMX512 - Grove - DMX512 adapter
ID: 583245
5906623469840
zł37.23
Tax included
zł30.27 tax excl.
Adapter with Grove connector to DMX512 connector (EIA-485 standard). The module is based on the SN75176 converter system. Seeed Studio 103020000
Description
Adapter with Grove connector to DMX512 connector (EIA-485 standard). It is the digital network communication standard most commonly used in lighting control systems or stage effects. The module is based on the SN75176 converter system. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. Full documentation of the module with examples of use is available on the product page.
Features
- Grove connector
- 3-pin DMX512 connector
- EIA-485 standard
Kit contains
- Grove DMX512 module
- Grove cable
583245
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 243
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
Delivery date unknown
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 17
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with LCD display 16x2 characters. The board is equipped with a Grove connector and communicates via UART. Seeed Studio 104020004
zł105.01
4 weeks
No product available!
Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006
zł18.12
24h
Available quantity: 1
Available
Module with a button and RGB LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020049
zł20.91
4 weeks
No product available!
Module with 8x8 RGB LED matrix, MY9221 LED drivers and STM32F031 microcontroller. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 105020073
zł70.79
24h
Available quantity: 3
Available
A sensor that detects the oxygen concentration. Equipped with a factory calibrated probe. It communicates via the UART interface or the analog output. Seeed Studio 101020912
zł539.04
4 weeks
No product available!
Module with TB6612FNG DC motors dual driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020103
zł59.56
24h
Available quantity: 1
Available
Doppler radar module with 24GHz BGT24LTR11 transceiver. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020021
zł357.33
4 weeks
No product available!
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070020
zł10.39
24h
Available quantity: 1
Available
Green mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070027
zł11.54
24h
Available quantity: 2
Available
Module with a passive buzzer. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020109
zł12.58
24h
Available quantity: 5
Available
Grove starter kit dedicated to Raspberry Pi minicomputers. Contains basic sensors and modules necessary for learning programming and electronics. Seeed Studio 110020169
zł261.47
24h
Available quantity: 1
Available
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 35°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020895
zł171.47
24h
Available quantity: 1
Available
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
zł32.75
24h
Available quantity: 2
Available
Module with FM receiver, with its help it is possible to receive radio waves broadcast in the FM band (frequency 50-115MHz). The module has been equipped with a 3,5mm jack socket, through which you can connect headphones. The module has a connector in accordance with the Grove standard. Seeed Studio 107020006
zł63.39
4 weeks
No product available!
Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872
zł33.84
24h
Available quantity: 3
Available
The touch sensor module (touch button) can be used as a replacement for traditional mechanical buttons. It operates based on the TTP223-B system, which measures the capacity of the metal field on the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020037
zł23.91
4 weeks
No product available!
Adapter with Grove connector to DMX512 connector (EIA-485 standard). The module is based on the SN75176 converter system. Seeed Studio 103020000