zł269.01
Grove 2-Channel SPDT Relay Module
ID: 583199
5906623415601
zł46.59
Tax included
zł37.88 tax excl.
Module with 2 relays SRD-05VDC-SL-C with a load up to 10 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020132
Description
The module with 2 relays SRD-05VDC-SL-C with a load up to 10 A. It enables switching devices with high power using, for example, a microcontroller. The relays are controlled with the voltage of 5 V. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module is controlled by digital inputs and is supplied with the voltage of 5 V. The set includes an acrylic housing that protects the module against damage. Full documentation of the module with examples of use is available on the product page.
Features
- Working voltage: 5V
- Nominal coil current: 89.3 mA
- TUV certification load: 10A 250VAC/10A 30VDC
- UL certification load: 10A 125VAC 28VDC
- Acceptable voltage: 250VAC/110VDC
- Power: 0.45 W
- Contact resistance: 100 mΩ
- Insulation resistance: 100 MΩ min. (500 V DC)
- On/off: 30 operations/min
- Contact material: AgCdO
- Digital inputs
- Output interface: 3-pin screw terminal
- Dimensions: 40 x 40 x 19 mm
- Weight: 257 g
Kit contains
- Grove 2-Channel SPDT Relay module
- Grove cable
- Acrylic housing
- Set of screws
583199
Data sheet
- Output current
- 10A
- Number of channels
- 2
- Executive element
- Przekaźnik
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 15
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 84
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 23
Available
Module with 4 relays SRD-05VDC-SL-C with a load up to 10 A. The board was equipped with a Grove connector and communicates via I2C. Seeed Studio 103020133
zł67.35
24h
Available quantity: 2
Available
Other products in the same category (16)
Blue mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070026
zł11.01
24h
Available quantity: 2
Available
The expansion module is designed for Raspberry Pi minicomputers. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103030275
zł37.10
24h
Available quantity: 3
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
zł47.53
24h
Available quantity: 3
Available
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020617
zł35.13
24h
Available quantity: 3
Available
The module with the ADIS16470 chip, which combines a 3-axis accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020672
zł1,941.11
4 weeks
No product available!
A set with a prototype breadboard equipped with a Grove connector. Seeed Studio 103020232
zł20.55
24h
Available quantity: 1
Available
Module with 2-element 14-segment display with red backlight. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104020132
zł33.64
24h
Available quantity: 3
Available
Module with a touch keyboard (12 buttons) based on the ATtiny1616 microcontroller. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020636
zł25.99
24h
Available quantity: 2
Available
Starter kit with nRF52840-MDK evaluation board and Grove modules designed for the development of Mesh networks. Seeed Studio 110061007
zł453.22
24h
Available quantity: 1
Available
UART-RS485 converter module. The board was equipped with a Grove connector. Seeed Studio 103020193
zł31.12
24h
Available quantity: 3
Available
Module with SSR M281 relay with a load of up to 1 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 101020603
zł29.75
24h
Available quantity: 3
Available
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634
zł296.82
24h
Available quantity: 1
Available
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
zł38.38
4 weeks
No product available!
Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599
zł80.80
24h
Available quantity: 3
Available
Module with a 16-channel PWM PCA9685 driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020102
zł71.03
24h
Available quantity: 1
Available
Module with TB6612FNG DC motors dual driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020103
zł59.56
24h
Available quantity: 1
Available
Module with 2 relays SRD-05VDC-SL-C with a load up to 10 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020132