Grove 4-Channel SPDT Relay module
ID: 583198
5906623415595
zł66.79
Tax included
zł54.30 tax excl.
Module with 4 relays SRD-05VDC-SL-C with a load up to 10 A. The board was equipped with a Grove connector and communicates via I2C. Seeed Studio 103020133
Description
The module with 4 relays SRD-05VDC-SL-C with a load up to 10 A. It enables switching devices with high power using, for example, a microcontroller. The relays are controlled with the voltage of 5 V using the STM32F30 microcontroller built into the module. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Working voltage: 5V
- Nominal coil current: 89.3 mA
- TUV certification load: 10A 250VAC / 10A 30VDC
- UL certification load: 10A 125VAC 28VDC
- Acceptable voltage: 250VAC / 110VDC
- Power: 0.45 W
- Contact resistance: 100 mΩ
- Insulation resistance: 100 MΩ min. (500 V DC)
- On / off: 30 operations / min
- Contact material: AgCdO
- Input interface: I2C
- Default I2C address: 0x11 or 0x12
- Available I2C address: 0x00 to 0x7F
- Output interface: 3-pin screw terminal
- Supply voltage: 3.3 V or 5 V
- Dimensions: 120 x 60 x 19 mm
- Weight: 257 g
Kit contains
- Grove 4-Channel SPDT Relay module
- Grove cable
- Acrylic housing
- Set of screws
583198
Data sheet
- Output current
- 10A
- Number of channels
- 4
- Executive element
- Przekaźnik
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 20
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Module with 2 relays SRD-05VDC-SL-C with a load up to 10 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020132
zł46.59
24h
Available quantity: 2
Available
Module with 8 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 103020136
zł446.91
Delivery date unknown
No product available!
Other products in the same category (16)
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
zł24.54
24h
Available quantity: 2
Available
Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192
zł60.63
24h
Available quantity: 2
Available
Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020077
zł173.93
24h
Available quantity: 1
Available
Recorder v3.0 is a module that allows you to record and play sounds. The module was based on the ISD9160FI system, it also has a FLASH memory with a capacity of 2 MB, which allows for recording up to 83 seconds long. The set contains a small loudspeaker on which recorded sounds can be played. Seeed studio 107020029
zł60.82
24h
Available quantity: 1
Available
Module with LM386 audio amplifier and loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020001
zł25.78
24h
Available quantity: 2
Available
Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599
zł79.54
24h
Available quantity: 3
Available
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł35.89
24h
Available quantity: 1
Available
The module with an electromagnet is powered by a DC voltage of 3.3/5V V with a holding force of 1 kg. It can be used to build a DIY electromagnetic lock, smart cabinet or door. Seeed Studio 101020073
zł53.63
24h
Available quantity: 1
Available
Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039
zł64.13
24h
Available quantity: 2
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł104.00
24h
Available quantity: 1
Available
Module with 6-position DIP switch. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020043
zł23.12
4 weeks
No product available!
Module with replaceable LED diodes in 4 colors: red, green, blue and white. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020228
zł12.80
24h
Available quantity: 1
Available
A sensor that detects the oxygen concentration. Equipped with a factory calibrated probe. It communicates via the UART interface or the analog output. Seeed Studio 101020912
zł539.04
4 weeks
No product available!
The module with the BS312 PIR sensor, which allows motion detection at a distance from 3.2 to 12 m. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020793
zł22.41
24h
Available quantity: 2
Available
Module with real time clock (RTC) PCF85063TP and CR1225 battery socket. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 102020083
zł44.24
24h
Available quantity: 4
Available
Module with a button and yellow LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020045
zł12.09
24h
Available quantity: 1
Available
Module with 4 relays SRD-05VDC-SL-C with a load up to 10 A. The board was equipped with a Grove connector and communicates via I2C. Seeed Studio 103020133