

Module with a slot optical sensor TCUT1600X01, which consists of an infrared emitter and two phototransistor detectors. It allows the detection of the rotation of the encoder disk located in the slot along with the direction of rotation. There are two LED diodes on the module indicating the status of each output. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module has two digital outputs (one for each of the detectors) and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
Base plate designed for NodeMCU (ESP8266 WIFI). The module is an expansion board that allows you to plug the NodeMCU into the slot and use the Grove sensor ports. Seeed Studio 105020008
Module with 2 relays SRD-05VDC-SL-C with a load up to 10 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020132
Expansion module with Qwiic connectors. The board is equipped with a Grove connector and allows communication via the I2C interface. Seeed Studio 103020292
No product available!
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
Recorder v3.0 is a module that allows you to record and play sounds. The module was based on the ISD9160FI system, it also has a FLASH memory with a capacity of 2 MB, which allows for recording up to 83 seconds long. The set contains a small loudspeaker on which recorded sounds can be played. Seeed studio 107020029
A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
No product available!
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
Module with SSR M281 relay with a load of up to 1 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 101020603
Module with a MLX90640 thermal imaging camera with a 32x24 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020142
No product available!
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250
No product available!
Grove starter kit dedicated to Raspberry Pi minicomputers. Contains basic sensors and modules necessary for learning programming and electronics. Seeed Studio 110020169
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 35°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020895
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
Module with slot optical sensor TCUT1600X01. The board is equipped with a Grove connector and has two digital outputs. Seeed Studio 101020587