Grove 6-Axis Accelerometer&Gyroscope (BMI088)
ID: 583185
zł158.76
Tax included
zł129.07 tax excl.
Module with a 6-axis BMI088 sensor that combines an accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020584
Description
Module with a 6-axis BMI088 sensor that combines an accelerometer and a gyroscope. It allows you to measure acceleration and angular velocity with a high resolution of 16 bits. It is characterized by a large measuring range of acceleration up to ± 24g, which makes it perfect for demanding projects such as drones or advanced robots. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Acceleration measurement range: ±3g @10920 LSB/g, ±6g @5460 LSB/g, ±12g @2730 LSB/g, ±24g @1365 LSB/g
- Angle Speed Measurement Range: ±125°/s @262.1 LSB/°/s, ±250°/s @131.1 LSB/°/s, ±500°/s @65.5 LSB/°/s, ±1000°/s @32.8 LSB/°/s, ±2000°/s @16.4 LSB/°/s
- Offset configuration possible: ± 30 mg, ± 1°/s
- Interface: I2C
- I2C address: 0x19, 0x18 (accelerometer), 0x69, 0x68 (gyroscope)
- Supply voltage: 3.3 V or 5 V
- Dimensions: 40 x 20 x 7 mm
- Weight: 9.4 g
Kit contains
- Grove 6-Axis Accelerometer&Gyroscope module
- Grove cable
583185
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Module type
- 6DoF
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Akcelerometr i żyroskop
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 16
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 227
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 17
Available
Other products in the same category (16)
Green mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070023
zł11.54
24h
Available quantity: 2
Available
Blue mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070022
zł11.54
24h
Available quantity: 2
Available
Module with OLED display 0.96" with a resolution of 128x64 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104020208
zł34.96
4 weeks
No product available!
Yellow mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070021
zł11.54
24h
Available quantity: 2
Available
Module with a pressure sensor with high accuracy HP206C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020068
zł131.47
24h
Available quantity: 1
Available
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070020
zł10.39
24h
Available quantity: 1
Available
Starter kit for the micro:bit v2. The kit includes an expansion module with Grove connectors, Grove modules with sensors and the necessary accessories. Seeed Studio 110060762
zł405.14
24h
Available quantity: 6
Available
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020353
zł27.87
24h
Available quantity: 3
Available
Module with an IR receiver operating at a frequency of 38 kHz. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020016
zł19.93
24h
Available quantity: 2
Available
Module with ITR9909 proximity sensor that can detect the presence of objects in the range from 9 to 30 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020175
zł37.04
24h
Available quantity: 2
Available
Module with real time clock (RTC) DS1307 and CR1225 battery socket. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020013
zł43.57
24h
Available quantity: 2
Available
Module with 42 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020173
zł120.42
24h
Available quantity: 1
Available
Module with 24 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020168
zł49.15
24h
Available quantity: 2
Available
The expansion module is designed for micro:bit v2. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100063
zł58.30
24h
Available quantity: 1
Available
The expansion module is designed for Arduino Nano boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100124
zł14.23
24h
Available quantity: 2
Available
Capacitive soil moisture sensor with analog output. The board is equipped with a Grove connector and communicates via a analog interface. Seeed Studio 101020614
zł29.38
24h
Available quantity: 4
Available
Module with a 6-axis BMI088 sensor that combines an accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020584