

Module with LCD display 16x2 characters. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the UART interface and is supplied with the voltage of 3.3 V or 5 V.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
No product available!
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
Module with LCD display 16x2 characters with black text and yellow backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020113
Module with LCD display 16x2 characters with black text and red backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020112
Module with LCD display 16x2 characters with white text and blue backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020111
No product available!
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
intelligent gesture recognition module equipped with an IR camera module PAG7646J1, PAG7661QN (ISP) and a LED for backlighting. Recognizes and interprets hand gestures by recognizing the image recorded by an infrared camera. Seeed Studio 101991067
The module with the BS312 PIR sensor, which allows motion detection at a distance from 3.2 to 12 m. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020793
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580
A small module - an infrared emitter (LED IR). The diode emits infrared light with a wavelength of 940 nm. With the help of the module, it is possible to transmit commands or signals that can be received by an infrared receiver. The transmission range is up to 10 meters. Seeed studio 101020026
No product available!
Module with a gas concentration sensor MQ2, which enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020055
I2C 8-channel expander module. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 103020293
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
Module with GSR skin resistance sensor. It is used to measure skin activity, which reflects the stress response and experienced emotions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020052
Module with a light sensor based on the APDS-9002 system. With the aid of this system, it is possible to measure the intensity of illumination in lux. The module has a connector in accordance with the Grove standard. Seeed studio 101020076
Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005
Module with a voltage divider. Equipped with a Grove connector, it allows the input voltage to be reduced by 3 or 10 times. Seeed Studio 104020000
No product available!
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
Module with LSM6DS3 sensor that combines a 3-axis accelerometer and a 3-axis gyroscope. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020012
Expansion module with Qwiic connectors. The board is equipped with a Grove connector and allows communication via the I2C interface. Seeed Studio 103020292
No product available!
Module with LCD display 16x2 characters. The board is equipped with a Grove connector and communicates via UART. Seeed Studio 104020004