zł10,639.61
.png)
New products
New products New products
Grove RGB LED Ring - ring with 16 RGB WS2813 Mini LEDs
ID: 583112
5906623437856
zł55.63
Tax included
zł45.23 tax excl.
Module with 16 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020171
Description
Ring with 16 RGB LEDs WS2813 Mini. The board has DIN and DOUT pins, so that the user can connect modules in series and control them with one signal line.
WS2813 supports the recovery system after a line break - in the event of one failure, the other LEDs will continue to glow. This system works until there are two faulty diodes next to each other. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product page.
Features
- WS2813 Mini diodes with a built-in controller
- Wake Up System
- Possibility to connect in rows
- Supply voltage: 3.3 V or 5 V
- Radius: 29 mm
583112
Data sheet
- Voltage
- 3,3 / 5 V
- Colour
- RGB
- Outer diameter
- 58 mm
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł109.91
24h
Available quantity: 238
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 135
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 17
Available
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
zł20.21
24h
Available quantity: 2
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł25.14
24h
Available quantity: 3
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
zł37.99
24h
Available quantity: 3
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 2
Available
Other products in the same category (16)
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1100 mA, offering a wide beam angle of 120 °
zł28.86
24h
Available quantity: 10
Available
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
zł32.61
24h
Available quantity: 5
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 300 mA, offering a wide beam angle of 120 °
zł6.15
24h
Available quantity: 18
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 350 mA, offering a wide beam angle of 120 °
zł7.42
24h
Available quantity: 3
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 400 mA, offering a wide beam angle of 120 °
zł9.80
24h
Available quantity: 4
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 500 mA, offering a wide beam angle of 120 °
zł12.73
24h
Available quantity: 6
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 600 mA, offering a wide beam angle of 120 °
zł15.55
24h
Available quantity: 8
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 700 mA, offering a wide beam angle of 120 °
zł16.92
24h
Available quantity: 8
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 800 mA, offering a wide beam angle of 120 °
zł22.52
24h
Available quantity: 8
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
zł24.18
24h
Available quantity: 4
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
zł27.08
24h
Available quantity: 2
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1100 mA, offering a wide beam angle of 120 °
zł30.54
24h
Available quantity: 4
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
zł33.52
24h
Available quantity: 5
Available
Ring with 7 individually addressable WS2812B RGB LEDs on a 23mm diameter board. A single data line controls the LEDs, while DIN and DOUT connections allow multiple WS2812B modules to be daisy-chained. The board operates from 5V, with the Ring7 specification listing a current consumption of 18mA per LED. Soldered 333055
zł15.82
24h
Available quantity: 4
Available
Ring with 12 individually addressable WS2812B RGB LEDs, allowing independent control of the color and brightness of each light point. The module operates at 5V and uses a single-wire data interface, while DIN and DOUT allow additional modules to be daisy-chained. The outer diameter of the ring is 44mm. Soldered 333070
zł18.66
24h
Available quantity: 2
Available
LED ring featuring 24 addressable WS2812B RGB LEDs with independent color and brightness control for each LED. A single data line controls the ring, while the data output allows additional compatible modules to be connected. The ring has a 67mm outer diameter, operates from a 5V supply and can be used for lighting animations and status indicators. Soldered 333101
zł37.11
24h
Available quantity: 2
Available
Module with 16 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020171