Grove TDS Sensor - module with a water quality sensor
ID: 583101
5906623415342
zł70.71
Tax included
zł57.49 tax excl.
Module with a TDS sensor that allows you to measure the total content of solids dissolved in water. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020753
Description
Module with a TDS (Total Dissolved Solids) sensor that allows you to measure the total content of solid compounds dissolved in water. The TDS index helps to determine the quality of the water - the higher it is, the more polluted the water is. The module is based on two integrated circuits: the LMV324 amplifier and the CD4060BM counter, and the included probe is waterproof. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via an analog interface (0 to 2.3 V) and is supplied with the voltage of 3.3 V or 5 V. It will be used in all projects requiring water quality measurement. Full documentation with examples of use is available on the product page.
Attention!
The probe must not be used in water hotter than 70 ° C and must not be placed too close to the edge of the container (it may affect the reading). Please note that the signal transmitter connector and board are not waterproof. Flooding them may damage the module.Features
- TDS measurement range: 0-1000 ppm
- TDS measurement accuracy: ± 10% F.S.
- Analog output: 0 to 2.3V
- Signal diode
- Waterproof probe with 60 cm cable
- Supply voltage: 3.3 V or 5 V
- Current consumption: 3 to 6 mA
- Dimensions: 40 x 20 mm
- Weight: 25 g
Kit contains
- Grove TDS Sensor module
- Grove cable
- Probe
583101
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 59
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 35
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 21
Available
Module with liquid turbidity sensor. The board is equipped with a Grove connector and communicates via a digital or analog interface. Seeed Studio 101020752
zł133.75
24h
Available quantity: 3
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with a 6-axis BMI088 sensor that combines an accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020584
zł158.76
4 weeks
No product available!
The expansion module is designed for Wio Lite tiles and compatible with Adafruit Feather. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020252
Regular pricezł30.81zł23.74
24h
Available quantity: 10
Available
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
zł15.36
24h
Available quantity: 2
Available
Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812
zł43.39
24h
Available quantity: 3
Available
Module with MQ5 LPG concentration sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020056
zł55.95
24h
Available quantity: 2
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
Starter kit for the micro:bit v2. The kit includes an expansion module with Grove connectors, Grove modules with sensors and the necessary accessories. Seeed Studio 110060762
zł405.14
24h
Available quantity: 6
Available
Module with an incremental encoder with a rotation range of 360°. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020001
zł27.43
24h
Available quantity: 4
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
zł52.25
24h
Available quantity: 4
Available
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł35.89
24h
Available quantity: 1
Available
A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006
zł97.67
24h
Available quantity: 5
Available
Module with 2 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital inputs. Seeed Studio 103020134
zł188.52
24h
Available quantity: 2
Available
Module with a 3-axis ADXL345 accelerometer with a configurable measuring range of ±2/±4/±8/±16 g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020054
zł49.69
24h
Available quantity: 2
Available
Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872
zł38.92
24h
Available quantity: 3
Available
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 35°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020895
zł171.47
24h
Available quantity: 1
Available
A module with a 24-bit ADC converter HX711, which enables reading data from strain gauges and scales. The board is equipped with a Grove connector and communicates via a serial interface. Seeed Studio 101020712
zł19.08
24h
Available quantity: 3
Available
Module with a TDS sensor that allows you to measure the total content of solids dissolved in water. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020753