Grove 2-Channel Solid State Relay - 2-channel module with SSR relays
ID: 583205
5906623416370
zł188.52
Tax included
zł153.27 tax excl.
Module with 2 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital inputs. Seeed Studio 103020134
Description
Module with 2 SSR relays G3MC202P with a load of up to 2 A. It enables switching devices with high power using, for example, a microcontroller. The relays are controlled with the voltage of 5 V. Compared to electromechanical relays, SSRs are based on semiconductor devices (transistors and thyristors) and offer faster switching speeds. However, they can only control alternating voltage. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module is controlled via digital inputs and is supplied with the voltage of 5 V. The set includes an acrylic housing that protects the module against damage. Full documentation of the module with examples of use is available on the product page.
Features
- Operating voltage: 4 to 6V
- Rated input voltage 5V
- Load voltage range 75 to 264 VAC 50/60 Hz
- Rated load voltage 100 to 240 VAC 50/60 Hz
- Load current 0.1 to 2 A
- Leakage current 1.5 mA max. (at 200 VAC)
- Insulation resistance 1000 MΩ (at 500 VDC)
- Working time: ½ cycle of load power source +1 ms
- Release time: ½ load feed cycle + 1 ms
- Interface: digital inputs
- Output interface: 2-pin terminal
- Supply voltage: 3.3 V or 5 V
- Dimensions: 40 x 40 x 25 mm
- Weight: 138 g
Kit contains
- Grove 2-Channel Solid State Relay module
- Grove cable
- Acrylic case
583205
Data sheet
- Output current
- 2A
- Number of channels
- 2
- Executive element
- SSR
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 20
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Module with 8 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 103020136
zł446.91
Delivery date unknown
No product available!
Module with relay SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital input. Seeed Studio 103020137
zł87.59
Delivery date unknown
No product available!
Other products in the same category (16)
Module with an electric charge (Coulomb) meter LTC2941. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020593
zł62.66
4 weeks
No product available!
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
zł84.92
24h
Available quantity: 1
Available
Module with GSR skin resistance sensor. It is used to measure skin activity, which reflects the stress response and experienced emotions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020052
zł47.33
4 weeks
No product available!
Module with real time clock (RTC) PCF85063TP and CR1225 battery socket. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 102020083
zł44.24
24h
Available quantity: 4
Available
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 5°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020894
zł360.69
4 weeks
No product available!
Module with temperature and humidity sensor TH02. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020074
zł64.23
24h
Available quantity: 3
Available
Module with relay SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital input. Seeed Studio 103020137
zł87.59
4 weeks
No product available!
Angled Grove socket for through-hole mounting, 4-pin, pitch 2.0 mm. Set of 10 pieces. Seeed Studio 110990037
zł8.12
4 weeks
No product available!
Module with BMA456 pedometer, which combines an acceleration sensor and built-in step counting algorithms. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020583
zł38.19
24h
Available quantity: 2
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł104.00
24h
Available quantity: 1
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł8.84
24h
Available quantity: 2
Available
Module with a sensor of formaldehyde (methanal) concentration in the air. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 101020972
zł356.05
4 weeks
No product available!
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
zł38.14
24h
Available quantity: 2
Available
Module with a purple LED diode. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020002
zł44.32
24h
Available quantity: 3
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
Module with 2 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital inputs. Seeed Studio 103020134