

zł27.78 tax excl.
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
Strip with RGB LED diodes, 1 m long, white. The tape is waterproof and there are 30 LEDs for each meter. The product uses WS2813 diodes (newer version of WS2812 diodes), which support the recovery system after a line interruption - in the event of a single diode failure, the LED strip will continue to glow. This system works until there are two damaged LEDs in succession. The tape is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. It is powered with the voltage of 5 V and consumes up to 1.8 A per meter.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
No product available!
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
Waterproof strip with RGB LED diodes, 1 m long (60 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020109
Module with BMA456 pedometer, which combines an acceleration sensor and built-in step counting algorithms. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020583
Module with liquid turbidity sensor. The board is equipped with a Grove connector and communicates via a digital or analog interface. Seeed Studio 101020752
Vertical Grove socket for through-hole mounting, 4-pin, pitch 2.0 mm. Set of 10 pieces. Seeed Studio 110990030
No product available!
Adapter with Grove connector to DMX512 connector (EIA-485 standard). The module is based on the SN75176 converter system. Seeed Studio 103020000
Module with a dust sensor PPD42NS. The board is equipped with a Grove cable and communicates via the PWM interface. Seeed Studio 101020012
No product available!
Module with a purple LED diode. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020002
Module with LCD display 16x2 characters. The board is equipped with a Grove connector and communicates via UART. Seeed Studio 104020004
No product available!
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
Module with a gas concentration sensor MQ9, which enables the detection of carbon monoxide and combustible gases (methane, propane). The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020045
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
Yellow mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070021
Module with 8 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 103020136
No product available!
MEMS SPU0414HR5H-SB analog microphone module. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020852
No product available!
Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006
No product available!
Green mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070027
I2C-CAN converter using the MCP2551 and MCP2515 systems and the ATmega168PA microcontroller. The module uses the I2C bus and the Grove connector for communication. Seeed Studio 113020111
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108