

Module with a button and RGB LED backlight in the form of an addressable SK6805 diode. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital interface (digital button output, LED control input) and is powered with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
Module with 6-position DIP switch. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020043
No product available!
Module with a MLX90640 thermal imaging camera with a 32x24 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020142
No product available!
Qwiic to Grove adapter cable, 100 mm long. Enables interoperability between the SparkFun Qwiic Connect system and Seeed Studio I2C-based Grove boards. SparkFun PRT-15109
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
UART-RS485 converter module. The board was equipped with a Grove connector. Seeed Studio 103020193
No product available!
Module with a voltage divider. Equipped with a Grove connector, it allows the input voltage to be reduced by 3 or 10 times. Seeed Studio 104020000
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020452
Module with a 3-axis ADXL356B accelerometer with a measuring range up to ± 20g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020637
Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022
No product available!
Vertical Grove socket for through-hole mounting, 4-pin, pitch 2.0 mm. Set of 10 pieces. Seeed Studio 110990030
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
Module with 6-position DIP switch. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020043
No product available!
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
Module with an electric charge (Coulomb) meter LTC2941. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020593
No product available!
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
A comprehensive beginner\'s kit that combines the XIAO board with a variety of Grove modules, allowing you to quickly create electronic projects. It is compatible with XIAO boards based on RP2040, SAMD21, nRF52840 or ESP32 and allows you to implement IoT projects, monitor weather conditions or detect motion, and also offers free educational courses. Seeed Studio 110010044
Module with a button and RGB LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020049