New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
Grove GPS - Air530Z GPS module + antenna
ID: 583075
5906623414536
zł47.90
Tax included
zł38.94 tax excl.
Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022
Description
Air530Z GPS module with external antenna with U.FL connector. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo, QZSS, SBAS and BeiDou. Determining the position with the help of the module allows you to achieve an accuracy of up to 2.5 m. It has a built-in CR1220 battery socket, which allows you to maintain the power of the system. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the UART interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Warm start time: 4 s
- Cold Start Time: 30 sec
- Positioning time:
- Cold start: 27.5 sec
- Hot start: <1s
- Capture: <1 sec
- Software assisted A-GNSS: <5 sec
- Sensitivity:
- Cold start: -148 dBm
- Hot start: -162 dBm
- Recovery: -164 dBm
- Tracking: -166 dBm
- Accuracy:
- Horizontal positioning accuracy: 2.5 m
- High positioning accuracy: 3.5 m
- Speed accuracy: 0.1 m/s
- Time accuracy: 30 ns
- UART interface
- Supply voltage: 3.3 V or 5 V
- Current consumption: 60 mA
Kit contains
- Grove GPS (Air530Z) module
- Grove cable
583075
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 27
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 29
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 21
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Grove starter kit dedicated to Raspberry Pi minicomputers. Contains basic sensors and modules necessary for learning programming and electronics. Seeed Studio 110020169
zł261.47
24h
Available quantity: 1
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
zł94.33
24h
Available quantity: 4
Available
Module with a microswitch (limit switch). The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł25.42
24h
Available quantity: 1
Available
Module with LCD display 16x2 characters with RGB backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104030001
zł99.68
24h
Available quantity: 2
Available
Module with a button and red LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł12.52
24h
Available quantity: 2
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
zł52.25
24h
Available quantity: 4
Available
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
zł84.92
24h
Available quantity: 1
Available
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634
zł303.63
24h
Available quantity: 1
Available
Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005
zł12.26
24h
Available quantity: 1
Available
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
zł12.71
24h
Available quantity: 2
Available
Module with a button and yellow LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020045
zł12.09
24h
Available quantity: 1
Available
5-port I2C splitter module. The board is equipped with Grove connectors and allows you to connect additional I2C devices. Seeed Studio 103020272
zł8.23
24h
Available quantity: 10
Available
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł8.84
24h
Available quantity: 7
Available
Ultrasonic distance sensor with a range from 3 to 350 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020010
zł19.14
24h
Available quantity: 5
Available
Module with a MLX90640 thermal imaging camera with a 32x24 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020142
zł786.54
4 weeks
No product available!
Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022