

USB - UART converter module based on the popular FT232RL chip by FTDI. The user has access to all lines of the system that are led out on connectors with a 2.54 mm pitch. The converter can work with the voltage of 5 V or 3.3 V and is powered by the USB connector or by the goldpin connectors. Depending on the position of the configuration switch, the user can use the voltage of 3.3 V or 5 V to supply external systems. The module is equipped with a 3.3 V voltage stabilizer with a capacity of 500 mA.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
Convenient to use retractable 3in1 USB cable with USB A plug and three output connectors: microUSB, USB Type C and Lightning
No product available!
RS232 - UART converter based on the MAX3238 chip. It uses all lines of the RS232 interface, thanks to which the user has all the standard\'s functionalities at his disposal. Pololu 126
No product available!
The module allows you to send UART (TTL) bus signals to a computer via a USB port. The adapter operates based on the PL2303HX chip and is recognized in the computer as a virtual serial port
No product available!
Converter dedicated to industrial applications. It provides communication between the USB interface and the RS232 and RS485 serial standard
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
The KAmodRS module is a reliable RS232-UART converter supporting voltages from 3 V to 5.5 V and enabling data transmission at a speed of up to 250 kbit/s. Thanks to the use of the MAX3232 chip, the module is ideal for a wide range of electronic and microcontroller applications requiring stable and effective serial communication
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a mini USB connector. Waveshare PL2303 USB UART Board (mini) V2
USB port isolator based on the ADUM3160 chip. The device has a rated insulation voltage of 1500V. The isolator is powered from the USB port.
No product available!
USB - RS232/RS485 converter with the original FT2132RNL chip. It uses a USB type A connector and a screw connector to connect RS232 and RS485 interfaces. Supports a wide range of operating systems: Mac, Linux, Android and Windows 11, 10, 8.1, 8, 7. Waveshare USB TO RS232/485
KAmod RS232S-mini is a miniature RS232 to TTL converter with a female DB9 connector, 2.54 mm goldpin pins, operating at 3-5.5 V, supporting all RS232 signals, based on the MAX3238/SP3238 chip, offering ESD protection up to 15 kV and corresponding to a DCE/Modem device
Converter dedicated to industrial applications. It provides communication between the USB interface and the RS422 and RS485 serial standard
No product available!
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A