CP2102 USB-UART Converter with Micro-USB Socket - Waveshare 11325
ID: 561045
5906623421725
zł19.54
Tax included
zł15.89 tax excl.
CP2102 USB to UART Module, USB micro connector
Overview
The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.
CP2102 features:
- Single-Chip USB to UART Data Transfer
- No external resistors required, no external crystal required
- On-chip power-on reset circuit and voltage regulator
- Integrated 1024-Byte EEPROM
- USB Function Controller
- USB Specification 2.0 compliant; full-speed (12 Mbps)
- USB suspend states supported via SUSPEND pins
- UART
- All handshaking and modem interface signals
- Data formats supported:
- Data bits: 5, 6, 7, and 8
- Stop bits: 1, 1.5, and 2
- Parity: odd, even, no parity
- Baud rates: 300 bps to 1 Mbits
- 576 Byte receive buffer; 640 byte transmit buffer
- Hardware or X-On/X-Off handshaking supported
- Event character support
- Virtual COM Port Device Drivers
- Windows 8/7/Vista/Server 2003/XP/2000
- MAC OS-X/OS-9
- Linux 2.40 or higher
- USBXpress Direct Driver Support
- Windows 7/Vista/Server 2003/XP/2000
- Windows CE
- Temperature Range
- –40 to +85 °C
Features
- Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
- Voltage output support: 5V or 3.3V
- Integrated USB protection device: SP0503
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Pins accessible on pinheaders: TXD, RXD, RTS, CTS
- Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)
How to Use
In the case of working with a MCU:
- VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
- GND: connects to GND
- TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
- RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
- RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
- CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)
Note: VCP examples and USBXpress driver program library are provided.
Dimension
Development Resources
Wiki : www.waveshare.com/wiki/CP2102_USB_UART_Board_(micro)
-
Weight: 0.014 kg
- CP2102 USB UART Board (micro) × 1
- 4-pin male pinheader & 4-pin female pinheader × 2
- 6-pin custom connector jumper wire × 1
561045
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
CP2102 USB to UART Module, USB type A connector
zł18.43
24h
Available quantity: 5
Available
Other products in the same category (16)
USB TO UART solution with USB Type A connector
zł26.26
24h
Available quantity: 28
Available
USB-UART converter for Odroid minicomputers. It is based on the CP2102N chip and is equipped with a USB type C connector
zł78.61
24h
Available quantity: 8
Available
USB - UART converter based on the PL2303 chip. Compatible with voltages of 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a USB type C connector. Waveshare PL2303 USB UART Board (Type C)
zł12.99
4 weeks
No product available!
A module with a USB converter - GPIO/ADC/I2C based on the MCP2221A chip. It allows you to connect sensors, displays or PWM drivers to the computer via a 2.54 mm or Stemma QT/Qwiic connector. Adafruit 4471
zł36.06
4 weeks
No product available!
USB - UART converter based on the CP2102 chip. Compatible with a voltage of 3.3 V, has been equipped with a USB type C connector. Waveshare CP2102 USB UART Board (Type C)
zł19.43
24h
Available quantity: 13
Available
USB-UART TTL converter based on the CH343G chip. Equipped with a number of security features ensuring stable and safe communication. Waveshare CH343 USB UART Board (type C)
zł12.44
24h
Available quantity: 5
Available
KAmod RS232H-mini is a miniature RS232 to TTL converter, operating in the voltage range of 3-5.5 V, supporting all RS232 signals, with a male DB9 connector, 2.54 mm goldpin pins, based on the MAX3243/SP3243 system, offering ESD protection up to 15 kV and a signal conversion direction corresponding to a DTE/Host device
zł21.19
24h
Available quantity: 152
Available
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
zł97.48
24h
Available quantity: 1
Available
A small USB-UART TTL converter module based on the CH340E chip with a microUSB connector
zł8.66
24h
Available quantity: 26
Available
Available
The base plate is dedicated to ESP32 CAM modules. It allows you to connect the camera via a USB interface, e.g. to a computer. ESP32-CAM-MB
zł12.15
24h
Available quantity: 8
Available
KAmod RS232H-ALL is a RS232 to TTL signal converter, supporting all RS232 interface signals, based on the MAX3243/SP3243 system, with a TTL side voltage of 3-5.5 V, a maximum transmission speed of 250 kbps, ESD protection up to 15kV HBM, a standard DB9 connector, a Phoenix MC 3.81 connector and 2.54 mm goldpin pins, with a board size of 65x30 mm (72x30 mm with a DB9 connector
zł32.30
24h
Available quantity: 182
Available
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
zł124.62
24h
Available quantity: 7
Available
CP2102 USB to UART Module, USB mini connector
zł20.66
24h
Available quantity: 3
Available
KAmod USB-UART-mini is a compact USB-C to UART converter, based on the FT230XS chip, enabling communication at speeds from 300 bps to 3 Mbps and providing the option of mounting using an additional front panel; includes LED indicators, supports signal voltages of 3.3 V, optionally 5 V, and offers support for Windows, Linux and Mac
zł28.82
24h
Available quantity: 150
Available
USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a micro USB connector. Waveshare PL2303 USB UART Board (micro) V2
zł15.84
24h
Available quantity: 5
Available
CP2102 USB to UART Module, USB micro connector