

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications.
This board still brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto-reset any Arduino board that has the reset pin brought out to a 6-pin connector.
The coolest thing about the FT231X Breakout is that we have broken out ALL the pins for your use, making this board all the more hackable! It also uses a common microUSB jack.
One of the features of this board is a jumper on the back, which allows the VCC output to be configured to either 3.3V or 5V. This board ships default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. It should be noted that the max input of the FT231X is only 3.3V, but it can operate down to 1.8V with external pull-ups and is also 5V tolerant.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
USB-TTL converter with CP2102N chip, which enables stable serial communication between computer and TTL devices, supporting baud rates up to 3 Mbps. The module operates at 3.3 V by default, tolerant of 5 V on inputs, and its compact size and standard 2.54 mm pitch make it easy to integrate into projects. Pololu 1317
Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050
Industrial grade USB-UART TTL converter. Equipped with a number of security features ensuring stable and safe communication. Waveshare USB TO TTL
The KAmod USB HID module with the CH9350 chip enables reliable extension of USB HID signals via UART transmission, offering stable connections over long distances. With built-in protection features, advanced LED indicators, and full system compatibility, the device is ideal for industrial applications, embedded systems, and advanced control setups using standard HID devices.
UART-RS232 converter module. It enables communication of Arduino boards with industrial modules. DFRobot DFR0258
No product available!
UART converter - USB based on the FT232RL system with TX, RX, RTS and CTS lines led out to the goldpin female connector. It uses a mini USB connector. Adafruit 284
USB-UART converter based on the CP2102N chip. Compatible with a voltage of 3.3 V, it has been equipped with a USB type C connector. Adafruit 5335
USB TO UART solution with USB Type A connector
No product available!
KAmod RS232H-ALL is a RS232 to TTL signal converter, supporting all RS232 interface signals, based on the MAX3243/SP3243 system, with a TTL side voltage of 3-5.5 V, a maximum transmission speed of 250 kbps, ESD protection up to 15kV HBM, a standard DB9 connector, a Phoenix MC 3.81 connector and 2.54 mm goldpin pins, with a board size of 65x30 mm (72x30 mm with a DB9 connector
KAmod RS232S-mini is a miniature RS232 to TTL converter with a female DB9 connector, 2.54 mm goldpin pins, operating at 3-5.5 V, supporting all RS232 signals, based on the MAX3238/SP3238 chip, offering ESD protection up to 15 kV and corresponding to a DCE/Modem device
The base plate is dedicated to ESP32 CAM modules. It allows you to connect the camera via a USB interface, e.g. to a computer. ESP32-CAM-MB
RS232 - UART converter module based on the MAX3232 chip. There is a DB9 connector on the board and a 4-pin connector with a 2.54 mm pitch
Versatile USB protocol converter, offering four channels (RS485, RS232, two TTL) and 12V, 5V and 3.3V power supply, ideal for IoT and industrial applications. Compatible with Windows, Linux, LattePanda and Raspberry Pi, no drivers required, and optional installation allows easy device management. DFRobot TEL0185
KAmod RS232H-mini is a miniature RS232 to TTL converter, operating in the voltage range of 3-5.5 V, supporting all RS232 signals, with a male DB9 connector, 2.54 mm goldpin pins, based on the MAX3243/SP3243 system, offering ESD protection up to 15 kV and a signal conversion direction corresponding to a DTE/Host device
The KAmodRS module is a reliable RS232-UART converter supporting voltages from 3 V to 5.5 V and enabling data transmission at a speed of up to 250 kbit/s. Thanks to the use of the MAX3232 chip, the module is ideal for a wide range of electronic and microcontroller applications requiring stable and effective serial communication
KAmod USB-UART-mini is a compact USB-C to UART converter, based on the FT230XS chip, enabling communication at speeds from 300 bps to 3 Mbps and providing the option of mounting using an additional front panel; includes LED indicators, supports signal voltages of 3.3 V, optionally 5 V, and offers support for Windows, Linux and Mac
BOB-13263