USB UART/I2C Debugger - USB-UART/I2C converter with MCP2221 chip

USB TO UART solution with USB Type A connector

USB - RS232 adapter equipped with a USB type A connector and an RS232 connector in the DB9 male standard. It uses the original FTDI FT232RL chip, which guarantees a reliable connection between a variety of devices. Waveshare USB-TO-RS232-Male-Cable

Versatile USB protocol converter, offering four channels (RS485, RS232, two TTL) and 12V, 5V and 3.3V power supply, ideal for IoT and industrial applications. Compatible with Windows, Linux, LattePanda and Raspberry Pi, no drivers required, and optional installation allows easy device management. DFRobot TEL0185

The FT232RNL USB to UART converter provides stable serial communication and debugging of industrial equipment, supporting 3.3V and 5V voltages and hardware flow control. With power indicators, protection diodes, and compatibility with multiple operating systems, it offers reliable data transfers from 300 bps to 3 Mbps, as well as additional protections against faults and electrostatic discharge. Waveshare USB TO TTL (C)

UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192

Converter dedicated to industrial applications. It provides communication between the USB interface and the RS422 and RS485 serial standard

UART - USB converter based on the FT232RL chip with TX, RX, RTS and CTS lines led out to the pin connector, the remaining lines available on solder fields for pin connectors. Micro-USB socket. Voltage supply from 3.3 to 5 V. FT232 USB UART Board (micro)

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, has been equipped with a USB type C connector. Waveshare FT232 USB UART Board (Type C)

USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a mini USB connector. Waveshare PL2303 USB UART Board (mini) V2

RS232 - UART converter module based on the MAX3232 chip. There is a DB9 connector on the board and a 4-pin connector with a 2.54 mm pitch

USB-TTL converter with CP2102N chip, which enables stable serial communication between computer and TTL devices, supporting baud rates up to 3 Mbps. The module operates at 3.3 V by default, tolerant of 5 V on inputs, and its compact size and standard 2.54 mm pitch make it easy to integrate into projects. Pololu 1317

Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050

USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02

Cable with USB-UART converter dedicated to TFmini and TFmini Plus distance sensors. Ended with a USB type A plug and goldpin connectors. Benewake USB-Dupon