KAmod RS232S-ALL RS232–TTL converter type DCE/Modem
ID: 1189291
5906623432967
zł44.14
Tax included
zł35.89 tax excl.
KAmod RS232S-ALL is a 3-5.5V RS232 to TTL converter supporting all RS232 signals, offering standard DB9 and Phoenix MC 3.81 connectors and 2.54mm goldpins, based on the MAX3238/SP3238 and providing ESD protection up to 15kV
Description
KAmod RS232S-ALL is a RS232 to TTL converter that includes all RS232 interface signals: RXD, TXD, DTR, DSR, RTS, CTS, DCD and RI. The signal conversion direction is assigned in such a way that it corresponds to a DCE/Modem device (slave device, TXD is the RS232 signal input, RXD is the RS232 signal output). The converter can operate at a voltage of 3...5.5 V on the TTL side. The board has a standard DB9 connector, a Phoenix MC 3.81 connector for easy connection of non-standard wiring and 2.54 mm goldpins for easy connection to evaluation boards.
Features
- RS232 to TTL converter, containing all 8 signals
- Based on the MAX3238/SP3238
- Voltage on the TTL side 3...5.5 V
- Maximum transmission speed: 250 kbps
- ESD protection up to 15 kV HBM on the RS232 side
- Signal conversion direction assigned in such a way that it corresponds to the slave device, type DCE/Modem (TXD is the RS232 signal input, RXD is the RS232 signal output)
- Standard DB9 (D-SUB 9) female connector
- Phoenix MC 3.81 type connector for easy connection of non-standard cabling on the RS232 side
- 2.54 mm goldpins on the RS232 side for easy connection to evaluation boards and measurements
- Power supply 3...5.5 V, approx. 20 mA
- Board dimensions 65x30 mm (72x30 with DB9 connector), height approx. 17 mm
1189291
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
zł124.62
24h
Available quantity: 7
Available
Xbee USB adapter based on the FTDI chip. Intended for configuring Xbee modules. Thanks to the female goldpin connector, it can be used as an FTDI programmer for Arduino FIO / pro / mini / lilypad. DFRobot DFR0050
zł81.45
24h
Available quantity: 2
Available
The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065
zł54.07
24h
Available quantity: 1
Available
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A
zł38.92
24h
Available quantity: 2
Available
USB - UART TTL converter based on the FT232RL chip, the module is equipped with a miniUSB socket. Works with 3.3V or 5V voltage levels.
zł15.73
4 weeks
No product available!
USB port isolator based on the ADUM3160 chip. The device has a rated insulation voltage of 1500V. The isolator is powered from the USB port.
zł70.37
4 weeks
No product available!
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
zł5.29
24h
Available quantity: 13
Available
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
zł38.38
24h
Available quantity: 1
Available
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
zł97.48
24h
Available quantity: 1
Available
RS232 - UART converter module based on the MAX3232 chip. There is a DB9 connector on the board and a 4-pin connector with a 2.54 mm pitch
zł4.51
24h
Available quantity: 22
Available
USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02
zł12.03
24h
Available quantity: 7
Available
The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232
zł24.44
24h
Available quantity: 5
Available
The base plate is dedicated to ESP32 CAM modules. It allows you to connect the camera via a USB interface, e.g. to a computer. ESP32-CAM-MB
zł12.03
24h
Available quantity: 12
Available
A module with a USB converter - GPIO/ADC/I2C based on the MCP2221A chip. It allows you to connect sensors, displays or PWM drivers to the computer via a 2.54 mm or Stemma QT/Qwiic connector. Adafruit 4471
zł36.73
24h
Available quantity: 4
Available
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, has been equipped with a USB type C connector. Waveshare FT232 USB UART Board (Type C)
zł26.47
4 weeks
No product available!
USB - UART converter based on the CP2102 chip. Compatible with a voltage of 3.3 V, has been equipped with a USB type C connector. Waveshare CP2102 USB UART Board (Type C)
zł19.50
4 weeks
No product available!
KAmod RS232S-ALL is a 3-5.5V RS232 to TTL converter supporting all RS232 signals, offering standard DB9 and Phoenix MC 3.81 connectors and 2.54mm goldpins, based on the MAX3238/SP3238 and providing ESD protection up to 15kV