New products
New products New products
zł119.00
Delivery date unknown
zł119.00
Delivery date unknown
RP2350-One development board with RP2350A, 4 MB flash, and USB Type-A connector - Waveshare 29453
ID: 1197549
5902186302570
zł24.35
Tax included
zł19.80 tax excl.
Waveshare RP2350-One is a compact development board featuring the RP2350A microcontroller with dual-core architecture: Arm Cortex-M33 and RISC-V. It offers a rich set of peripherals and 4 MB of Flash memory. With a direct USB Type-A connector, support for C/C++ and MicroPython, and SMT mounting capability, it is ideal for modern embedded applications, automation, and technical education.
Description
The RP2350-One development board from Waveshare is based on the RP2350A microcontroller designed by Raspberry Pi, featuring a unique dual-core architecture with two Arm Cortex-M33 cores and two Hazard 3 RISC-V cores. With flexible clocking up to 150 MHz, 520 KB of SRAM, and 4 MB of built-in Flash memory, the board enables the development of advanced embedded projects. The module includes a USB Type-A plug in the form of a PCB connector, allowing direct connection to a USB port without additional cables. The castellated hole design enables SMT mounting on a base board.
The board offers 29 configurable GPIO pins, including interfaces such as SPI, I2C, UART, PWM, ADC, as well as PIO and a temperature sensor. It supports low-power sleep modes and can be programmed via drag-and-drop over USB. The board is compatible with C/C++ and MicroPython environments and provides access to comprehensive documentation and developer resources from the manufacturer.
Specifications
- Microcontroller: Raspberry Pi RP2350A
- Architecture: 2× Arm Cortex-M33 + 2× Hazard 3 RISC-V
- Clock speed: up to 150 MHz
- SRAM: 520 KB
- Flash memory: 4 MB (W25Q32JVSSIQ)
- Connector: USB Type-A plug (PCB)
- Number of GPIOs: 29 (20 on side headers, the rest as solder points)
- Interfaces: 2× SPI, 2× I2C, 2× UART, 4× 12-bit ADC, 16× PWM, 12× PIO
- Temperature sensor
- Low-power modes supported
- Programming: USB mass storage (drag-and-drop)
- Supported languages: C/C++, MicroPython
- Additional components: BOOT button, RESET button, WS2812 RGB LED, RT9013-33GB regulator (500 mA LDO)
- SMT mountable (castellated holes)
1197549
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 4 MB
- Number of I/O
- 29
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 35,5 cm
- Width
- 18 mm
- USB connector type
- USB type A
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Camera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432
zł149.00
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288
zł70.41
24h
Available quantity: 4
Available
RP2350-LCD-0.96-M is a versatile development board with a display, designed for projects based on RP2350A microcontrollers. It supports multiple interfaces and programming languages, features pre-soldered headers, and is compatible with Pico HAT modules, making it ideal for prototyping embedded systems, portable devices, and educational projects.
zł44.45
24h
Available quantity: 1
Available
A modular control platform based on the RP2040 microcontroller, designed for advanced robotics and engineering projects. It can simultaneously support up to six high-power modules, such as motor, servo, and LED lighting controllers. Power is supplied via an XT30 connector, ranging from 5 to 17 V, with built-in current and voltage protection. It supports MicroPython programming. Pimoroni PIM687
zł173.25
4 weeks
No product available!
RP2350-Touch-AMOLED-1.8 is a compact board with a touchscreen AMOLED display, an RP2350A microcontroller, and a rich set of peripheral features. It enables rapid development of modern interactive devices with a graphical interface, sensor support, and audio, ideal for educational and embedded applications.
zł121.71
24h
Available quantity: 4
Available
Development board equipped with RP2040 microcontroller, RGB LED diodes, buzzer and Qwiic/STEMMA QT connectors. Pin spacing compatible with Arduino Nano. Cytron MAKER-NANO-RP2040
zł45.94
24h
Available quantity: 6
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-16MB
zł27.64
24h
Available quantity: 5
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
zł14.56
24h
Available quantity: 122
Available
RP2350-LCD-1.47-A-M is an integrated development platform with a USB Type-C port and pre-soldered headers, enabling the creation and testing of applications based on the modern RP2350A microcontroller. Featuring an LCD display, large memory capacity, and the ability to choose between ARM and RISC-V architectures, the module is suitable for educational projects, embedded systems, and IoT solutions.
zł49.59
24h
Available quantity: 5
Available
RP2040-Touch-LCD-1.69 is a high-performance, integrated MCU board designed for interactive device developers. With a touch display, 6-axis sensor, RTC, and power management, it is suitable for HMI systems, mobile devices, data loggers, and IoT solutions. Support for MicroPython and Arduino facilitates rapid prototyping and deployment.
zł96.83
24h
Available quantity: 3
Available
Development board based on the RP2040 microcontroller. It is equipped with a 1.14" color LCD display and a built-in debugging tool via USB interface. The board is enclosed in a plastic housing. Waveshare RP2040-GEEK
zł44.43
24h
Available quantity: 2
Available
USB RTC module based on Raspberry Pi RP2040 microcontroller. It combines MicroSD card slot, LCD display and CR1220 battery holder. SB Components SKU25138
zł296.82
24h
Available quantity: 3
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 271
Available
Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613
zł176.97
24h
Available quantity: 2
Available
RP2350-Touch-AMOLED-1.8 with battery is an advanced development board with an AMOLED display, touch support, motion sensors, audio, and a wide range of interfaces. Designed for mobile and embedded applications, it enables the creation of compact interactive devices with full open-source support.
zł129.36
24h
Available quantity: 4
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
zł139.00
24h
Available quantity: 21
Available
Waveshare RP2350-One is a compact development board featuring the RP2350A microcontroller with dual-core architecture: Arm Cortex-M33 and RISC-V. It offers a rich set of peripherals and 4 MB of Flash memory. With a direct USB Type-A connector, support for C/C++ and MicroPython, and SMT mounting capability, it is ideal for modern embedded applications, automation, and technical education.