zł24.82 tax excl.
Module with an analog TEMT6000 light intensity sensor. The voltage at the output is linearly correlated with the intensity of the incident light. The module is supplied with the voltage from 3.3 to 5V. DFRobot SEN0043
Module with an analog TEMT6000 light intensity sensor. The sensor is based on a phototransistor, it is placed in a small SMD housing and has a wide sensitivity angle. The voltage at the output is linearly correlated with the intensity of the incident light. The sensor is powered with the voltage ranging from 3.3 V to 5 V and has an analog output (Gravity connector). The product wiki page includes the manual and sample programs.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Module with an analog TEMT6000 light intensity sensor. The output voltage increases with increasing intensity of the incident light. The sensor is powered by 5 V. SparkFun BOB-08688
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
No product available!
Module with slot optical sensor TCUT1600X01. The board is equipped with a Grove connector and has two digital outputs. Seeed Studio 101020587
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020173
Module with a SI1151 light sensor that can detect waves with a wide range of wavelengths: visible and infrared light. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020089
Ambient light sensor placed in a transparent hemisphere. It supports a detection range of 0 to 200 klx and communicates via the I2C interface. DFRobot SEN0390
Sensor for detecting the distance, intensity and frequency of lightning within a radius of 40 km. The module enables weather enthusiasts to measure local storm data. SparkFun SEN-15441
No product available!
Module with 11-channel AS7341 sensor that allows to detect light in different wavelength ranges (color detection). It communicates via the I2C interface. DFRobot SEN0365
No product available!
The module allows the measurement of lighting in the vicinity of the sensor. The measuring range is from 1 to 65535 LUX, and communication takes place using the I2C bus. DFRobot SEN0097
Module with 11-channel AS7341 sensor that allows to detect light in different wavelength ranges (color detection). It communicates via the I2C interface. Waveshare AS7341 Spectral Color Sensor
No product available!
Module with color and light intensity sensor. Offers a wide detection range and two LED backlights. It communicates via the I2C bus. It communicates via the I2C bus. Pimoroni PIM375
Module with a light sensor and a proximity sensor up to 5 cm. It allows you to read the illuminance from 0.01 to 64000 lux and communicates via the I2C interface. Pimoroni PIM413
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. It communicates via the I2C interface. Waveshare UV Sensor (C)
Module with light intensity sensor TSL2591. Equipped with STEMMA QT connector with I2C interface. Adafruit 1980
Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681
No product available!
Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161
Module with a 10-channel AS7341 sensor that detects light in various wavelength ranges (color detection). It communicates via the I2C interface. Adafruit 4698
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4831
Module with an analog TEMT6000 light intensity sensor. The voltage at the output is linearly correlated with the intensity of the incident light. The module is supplied with the voltage from 3.3 to 5V. DFRobot SEN0043