

TEMT6000 light intensity sensor module. TEMT6000 is an analog light intensity sensor in the form of a phototransistor in a small SMD housing with a wide sensitivity angle. The output voltage increases with increasing intensity of the incident light. The sensor is powered with the voltage of 5 V.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Cables for evaluation boards, set of 10 pcs., blue colour
Cables for evaluation boards, set of 10 pcs., red colour
Cables for evaluation boards, set of 10 pcs., green colour
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
A 5-channel flame detector module for detecting a flame over a larger area. Detects fire with 5 sensors that are placed on the module every 30 degrees. It has a digital and analog output. modFLAME-5CH
Color sensor with a range from 8 to 16 mm. It offers 3 operating modes and can be powered with the voltage from 12 to 24 V. DFRobot SEN0506
Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681
No product available!
Module with a light intensity sensor BH1750FVI dedicated to the M5StickC sets. It communicates via the I2C interface. M5Stack U134
modTSL2561 is a module containing a light sensor TSL2561; communication with the system takes place using the I2C bus
Module with light sensor (photoresistor). An analog output was led out on the XH2.54 connector
Light sensor module in the form of a photoresistor. A comparator and a potentiometer are placed on the board. The module has a digital output
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787
No product available!
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020132
Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580
Module with slot optical sensor TCUT1600X01. The board is equipped with a Grove connector and has two digital outputs. Seeed Studio 101020587
TCS34725 RGB Color Sensor is a color sensor TCS34725 controlled by the I2C interface. It is powered by voltage in the range of 3.3 ... 5V and is intended for Arduino-compatible boards. DFRobot SEN0212
Module with three optical inspection sensors (spectrophotometers) from the AS7265x series. The module consists of three sensors; AS72651, AS72652 and AS72653 which can detect wavelengths from 410nm (UV) to 940nm (IR). SparkFun SEN-15050
Ambient light sensor housed in a transparent hemisphere and waterproof housing. It supports a detection range of 0 to 65535 lux and communicates via an I2C interface. DFRobot SEN0562
Color Sensor, complete color detector
ireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide light intensity measurement range from 0 to 160000 Lux. Seeed Studio 114992868
Module with an analog TEMT6000 light intensity sensor. The output voltage increases with increasing intensity of the incident light. The sensor is powered by 5 V. SparkFun BOB-08688