BME280 Breakout - module with pressure, temperature and humidity sensor
ID: 587087
606034879638
zł75.68
Tax included
zł61.53 tax excl.
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
Description
Module with pressure, temperature and humidity sensor BME280. It allows you to read atmospheric pressure in the range from 300 to 1100 hPa with an accuracy of ±1 hPa, temperature in the range from -40 to 85℃ with an accuracy of ±1°C and humidity with an accuracy of ±3%. The module communicates via the I2C interface and is supplied with the voltage from 2 to 6 V. It is an ideal solution for measuring the temperature at home, as well as for measuring altitude during flights at high altitudes. Documentation with a library and examples in Python is available in the GitHub repository.
Features
- Pressure measurement: from 300 to 1100 hPa
- Temperature measurement: -40 to 85 ℃
- Humidity measuring range: 0 to 100% RH
- Reverse polarity protection
- Compatible with all Raspberry Pi and Arduino models
- Supply voltage: 2 to 6 V
- I2C interface
- I2C address: 0x76 or 0x77
- Dimensions: 19 x 19 x 2.75 mm
Kit contains
- BME280 Breakout module
- Straight male connector 1x5
- Angle female connector 1x5
587087
Data sheet
- Interface
- I2C
- Type of sensor
- BME280
- Power supply voltage
- 2 - 6 V
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
Module with pressure and temperature sensor BMP280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM411
zł57.97
24h
Available quantity: 4
Available
Expander with two I2C connectors and one SPI for Raspberry Pi Pico. It has sockets compatible with Pimoroni Breakout modules. Pimoroni PIM547
zł45.26
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
zł115.82
24h
Available quantity: 4
Available
Module with digital barometer BMP390. It enables pressure measurement from 300 to 1250 hPa and temperature from -40℃ to 85℃. Communicates via I2C or SPI. Adafruit 4816
zł56.09
24h
Available quantity: 1
Available
Module with digital barometer BMP388. It enables pressure measurement in the range from 300 to 1250 hPa and communicates via I2C or SPI. Waveshare BMP388 Barometric Pressure Sensor
zł79.37
24h
Available quantity: 2
Available
DFRobot SEN0629 environmental module with a BME688 sensor enables precise measurement of temperature, humidity, pressure, and VOC, and supports AI-assisted gas analysis. Compatibility with I2C/SPI and broad functionality make it suitable for use in smart building systems, environmental monitoring, and industry.
zł66.22
24h
Available quantity: 1
Available
Module with digital barometer BMP384. It enables pressure measurement in the range from 300 to 1250 hPa with 24-bit resolution and communicates via I2C. SparkFun SEN-19833
zł91.00
24h
Available quantity: 3
Available
Module with digital barometer BMP581. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 5 Pa and communicates via I2C. SparkFun SEN-20171
zł120.95
24h
Available quantity: 1
Available
Pressure sensor module with I2C interface (MPL115A2)
zł44.90
24h
Available quantity: 19
Available
Module with waterproof barometer LPS33HW. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4414
zł71.02
24h
Available quantity: 3
Available
The MPX5700AP air pressure sensor with a measuring range from 15 to 700 kPa. It communicates via the I2C interface. DFRobot SEN0456
zł331.66
24h
Available quantity: 1
Available
Crowtail – BMP180 Barometer is a digital pressure and temperature sensor with an I2C interface, intended for precise measurements in mobile and environmental systems. It offers high accuracy, low power consumption, and readiness to operate without additional calibration.
zł11.46
24h
Available quantity: 5
Available
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
zł109.00
24h
Available quantity: 3
Available
LPS28DFW absolute pressure sensor module. The chip features a wide measurement range of 260 to 1260 hPa or 260 to 4060 hPa and a high accuracy of 0.5 hPa. It communicates via an I2C interface. SparkFun SEN-21221
zł152.13
24h
Available quantity: 2
Available
KAmodLPS331 is a module that allows the measurement of atmospheric pressure in the range of 260 - 1260 hPa with a resolution of 0.02 hPa. Supply voltage 2.5 - 5.5 V,
zł22.90
24h
Available quantity: 282
Available
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
zł22.45
24h
Available quantity: 1
Available
Atmospheric pressure sensor, capable of measuring up to 4060 hPa, which allows it to be used even in underwater projects to a depth of about 40 meters. Thanks to high precision (±0.5 hPa) and a sampling rate of up to 200 Hz, it is also ideal for dynamic measurements of altitude and pressure in atmospheric conditions. The built-in metal port allows remote pressure measurement through a tube, and compatibility with the STEMMA QT system and ready-made libraries for Arduino and CircuitPython make integration with microcontrollers quick and easy. Adafruit 6067
zł65.69
24h
Available quantity: 1
Available
Module with a BME688 sensor for measuring gas concentration, pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-19096
zł196.21
24h
Available quantity: 3
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472