zł10,639.61
.png)
New products
New products New products
Gravity: I2C BME280 Environmental Sensor (Temperature, Humidity, Barometer)
ID: 565661
5902186312913
zł84.13
Tax included
zł68.40 tax excl.
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
Description
BME280 is an environmental sensor that integrates onboard temperature sensor, humidity sensor and barometer. The sensor is of high precision, multiple functions, and small size etc. It provides both SPI and I2C interfaces, which make it easy to make a fast prototypes. It can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on.
Gravity I2C BME280 Environmental Sensor has based on BoSCH newest MEMS sensor (Micro-Electro-Mechanical System). It is very stable to compare with other kind of sensors, especially the air pressure measurement, the offset temperature coefficient is ±1.5 Pa/K, equiv. to ±12.6 cm at 1 °C temperature change. Therefore, the stable and multi-function make BME280 become a good choice in many scenes.
Features
- Compatible with 3.3V/5V microcontrollers
- Environmental monitoring: temperature, humidity and barometer
- Gravity I2C interface and reserve XH2.54 SPI interface
- Small size, convenient to install
SPECIFICATION:
- Working Voltage:3.3V~5.0V
- Working Current:2mA
- Working Temperature:-40?~+85?
- Temperature Measuring Range: -40?~+85?, resolution of 0.1?, deviation of ±0.5?
- Humidity Measuring Range: 0~100%RH, resolution of 0.1%RH, deviation of ±2%RH
- Pressure Measuring Range: 300~1100hPa
- Humidity Sampling Time: 1s
- Dimension: 22 * 25 mm/ 0.87 * 0.98 inches
- Weight: 12g
APPLICATIONS:
- Context awareness, e.g. skin detection, room change detection
- Home automation control (control heating, venting, air conditioning (HVAC))
- Internet of things
- GPS enhancement (e.g. time-to-first-fix improvement, dead reckoning, slope detection)
- Indoor navigation (change of floor detection, elevator detection)
- Outdoor navigation, leisure and sports applications
- Weather forecast
- Vertical velocity indication (rise/sink speed)
KIT CONTENT:
- Gravity: I2C BME280 Environmental Sensor (Temperature, Humidity, Barometer) x1
- XH2.54-6pin Header x1
- Gravity-4P I2C/ UART Sensor Wire x1
565661
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BME280
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Precision sensor from Bosch for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy Adafruit 2652
zł80.85
24h
Available quantity: 8
Available
The BME280 integrated circuit is a sensor of atmospheric conditions (pressure, humidity, temperature) in the SMD casing (2.5mmx2.5mm). The sensor has very low power consumption (average 3.6uA) and has an I2C / SPI bus. The Bosch Sensortec system
zł21.29
Delivery date unknown
No product available!
Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
zł65.65
24h
Available quantity: 2
Available
Other products in the same category (16)
The AM2301A temperature and humidity sensor is designed to measure in a variety of environmental conditions. It offers a measuring range of temperature from -40 to +80 °C and humidity from 0 to 100%RH. AM2301A
zł22.90
4 weeks
No product available!
A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776
zł32.87
24h
Available quantity: 48
Available
Gravity: High Accuracy is a multifunctional environmental sensor with Gravity I2C and UART output. Perfect for weather station projects. DFRobot SEN0501
zł142.27
24h
Available quantity: 1
Available
The temperature and humidity sensor with RS485 Modbus interface is a precise measuring device, ideal for industrial automation systems, easily integrated thanks to the Modbus RTU protocol. Mounted on a DIN rail, it measures temperature from -40°C to 80°C and humidity up to 100% RH, providing reliable data in harsh environmental conditions.
zł36.16
24h
Available quantity: 4
Available
The Iduino SE052 module with a DHT11 sensor enables easy integration with microcontrollers for measuring temperature and humidity. Ideal for weather stations, data loggers, and home automation, it offers stable and long-term performance across a wide range of applications.
zł7.68
24h
Available quantity: 5
Available
Compact expansion with advanced data monitoring features, equipped with temperature, humidity, light sensors and RTC clock. With low power consumption, battery monitoring function and I2C protocol support, it is ideal for long-term battery-powered projects, offering precise measurements and efficient power management. Seeed Studio 114993446
zł40.87
24h
Available quantity: 2
Available
High-end temperature and humidity sensor module, offering ±1.0% RH and ±0.1°C precision and full I2C communication. With 3.3 to 5V voltage compatibility, STEMMA QT connectors and IP67 protection, it is easy to integrate and resistant to harsh environmental conditions. Ideal for IoT projects, weather stations and automation systems requiring accurate measurements. Adafruit 6174
zł77.29
24h
Available quantity: 27
Available
KAmod Si7021 is a compact module with a digital temperature and humidity sensor, operated via the I2C interface, dedicated to environmental applications. Qwire connectors and the traditional 2.54 mm pitch provide easy integration with various hardware platforms.
zł39.20
24h
Available quantity: 174
Available
LHT52 Indoor LoRaWAN Sensor US915 – air temperature and humidity sensor for LoRaWAN, IP52 - Seeed...
LHT52 Indoor LoRaWAN Air Temperature and Humidity Sensor US915 Seeed Studio 101990984 is a wireless air temperature and humidity sensor designed for smart home systems, offices, and industrial applications. Thanks to battery power, data logging, and LoRaWAN compatibility, it is suitable for environmental monitoring, building automation, and precision agriculture.
zł149.83
4 weeks
No product available!
DFRobot SEN0629 environmental module with a BME688 sensor enables precise measurement of temperature, humidity, pressure, and VOC, and supports AI-assisted gas analysis. Compatibility with I2C/SPI and broad functionality make it suitable for use in smart building systems, environmental monitoring, and industry.
zł67.74
4 weeks
No product available!
Crowtail – HTU21D Humidity & Temperature Sensor 2.0 enables accurate temperature and humidity measurement using the digital I2C interface. It is suitable for environmental monitoring projects, automation systems, and weather stations.
zł18.19
24h
Available quantity: 4
Available
LHT65N sensor for measuring air temperature and humidity with LoRaWAN 868MHz communication, supporting an external temperature probe, designed for long-term environmental monitoring. Seeed Studio 113990756
zł200.92
24h
Available quantity: 1
Available
BME688 environmental sensor module for measuring temperature, humidity, atmospheric pressure and VOC gas resistance; IAQ index calculation using the Bosch BSEC library; Bosch AI Studio support for gas mixture recognition; I2C interface; 3.3 V power supply and logic levels; 2 Grove connectors; compatible with Raspberry Pi and Raspberry Pi Pico.
zł179.00
24h
Available quantity: 3
Available
Expansion board for BBC micro:bit designed for measuring environmental parameters and controlling devices based on sensor readings. Equipped with a BME280 temperature, pressure and humidity sensor, a real-time clock, two 1 A outputs, a servo output, piezo buzzer and ZIP LEDs. It can be powered by 3 AA batteries or through a 2.1 mm DC jack and also includes a solar panel input for charging rechargeable batteries. Kitronik 5697
zł155.35
24h
Available quantity: 5
Available
Measurement module with a digital SHTC3 sensor, designed for measuring temperature and relative humidity. It offers a temperature measurement range from -40°C to 125°C with an accuracy of ±0.2°C and a humidity measurement range from 0% to 100% RH with an accuracy of ±2% RH. Communication is provided via I2C at address 0x70. Soldered 333032
zł24.66
24h
Available quantity: 1
Available
BME680 environmental sensor module for measuring temperature, humidity, atmospheric pressure, and parameters used for air quality assessment. It communicates over I2C at address 0x76 and features two Qwiic connectors for integration with compatible boards. The breakout supports 3.3V and 5V power supplies. Soldered 333035
zł70.26
Delivery date unknown
No product available!
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236