SHT35 Digital Temperature & Humidity Sensor Breakout - module with SHT35 temperature and humidity sensor
ID: 581459
5906623406289
zł73.74
Tax included
zł59.95 tax excl.
Module with a digital temperature and humidity sensor based on the SHT35. Communication via the I2C interface. DFRobot SEN0333
Description
Module with a digital temperature and humidity sensor based on the SHT35 chip by Sensirion. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. The sensor is internally calibrated, communication via the I2C interface. It is compatible with 3.3V and 5V controllers such as Arduino, micro:bit, ESP32.
Code example is available on Wiki website.
Features
- Humidity measuring range: 0% RH to 100% RH
- Humidity measuring accuracy: ± 1.5% RH @ 0% RH to 80% RH (at 25℃)
- Temperature measurement range: -40℃ to 125 ℃
- Temperature measurement accuracy: ± 0.2 ° C at -40°C to 90°C
- Communication: I2C
- Voltage: 2.15 to 5.5V
- Working current: <1.5 mA
- Tile sizes: 19 x 16 mm
- Mounting hole size: 2 mm
- Mounting holes distance: 15 mm
Kit contains
- Module with SHT35 sensor
- Straight 6-pin goldpin connector
581459
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 308
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 357
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 117
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 20
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 9
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 8
Available
Analogue temperature and humidity sensor module based on SHT30 sensor. It is characterized by high reliability and stability with low energy consumption. It is compatible with 3.3V and 5V controllers, such as Arduino, micro:bit, ESP32. DFRobot DFR0588
zł31.05
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a temperature and humidity sensor DHT22. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80℃. DFRobot SEN0137
zł43.51
24h
Available quantity: 3
Available
Module with a steam sensor. It can be supplied with the voltage of 3.3 V or 5 V. It has an analog output. DFRobot SEN0121
zł6.21
24h
Available quantity: 3
Available
Module with temperature and humidity sensor DHT11. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020011
zł21.66
24h
Available quantity: 2
Available
A module with an AHT20 industrial grade temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101990644
zł41.98
24h
Available quantity: 2
Available
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634
zł296.82
24h
Available quantity: 1
Available
Module with SHT35 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020592
zł63.76
24h
Available quantity: 1
Available
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
zł103.57
24h
Available quantity: 3
Available
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
zł50.12
24h
Available quantity: 2
Available
Digital Temperature & Humidity Sensor - SHT10 temperature and humidity sensor with a stainless probe
Temperature and humidity sensor SHT10 with a stainless probe. Provides high temperature and pressure resistance. DFRobot SEN0148
zł163.41
4 weeks
No product available!
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
zł79.85
24h
Available quantity: 1
Available
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
zł159.90
2 weeks
No product available!
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
zł815.50
3 weeks
No product available!
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
zł75.68
24h
Available quantity: 6
Available
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
zł115.82
24h
Available quantity: 2
Available
Module with a temperature and humidity sensor based on the SHT40 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4885
zł28.03
4 weeks
No product available!
Module with integrated BME688 gas, pressure, temperature and humidity sensor placed in one MEMS housing. It is equipped with an I2C interface. Adafruit 5046
zł101.93
24h
Available quantity: 3
Available
Module with a digital temperature and humidity sensor based on the SHT35. Communication via the I2C interface. DFRobot SEN0333