Gravity: I2C BME680 Environmental Sensor - environmental sensor 4 in 1
ID: 569879
5902186313422
zł112.72
Tax included
zł91.64 tax excl.
I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248
Description
The I2C BME680 Environmental Sensor is an advanced 4-in-1 sensor that includes measurements of environmental conditions such as volatile organic compound (VOC) concentration, atmospheric pressure, temperature and humidity. The module was based on the BOSCH MEMS system with the BME680 designation. The system is supplied with voltage in the range 3.3-5 V and can communicate via the I2C interface (output at the Gravity connector) or SPI (backup connection). The module will be used in projects that monitor air status, eg in home automation, small meteorological stations or Internet of Things (IoT). Thanks to the technology used, the module has a small size and low energy consumption.
The product is compatible with Arduino boards and has a library prepared for Arduino IDE.
properties
- Temperature measurement range: -40 ~ 85 ℃
- Temperature measurement accuracy: ± 1 ℃
- The range of air humidity measurement: 0-100%
- Accuracy of air humidity measurement: ± 3%
- Atmospheric pressure measurement range: 300-1100 hPa
- Accuracy of atmospheric pressure measurement: ± 0.6 hPa
- Range of air quality measurement: 0-500 (the higher the value, the worse the air condition)
- Interface: I2C, SPI
- Gravity connector
- Power consumption: 5 mA
- Power supply: 3.3-5 V
- Module dimensions: 30 × 22 mm
Included
- I2C BME680 Environmental Sensor Module
- Goldpin connector
- Gravity connection cable
569879
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BME680
- Power supply voltage
- 3,3 - 5 V
- Concentration measurement
- VOC
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
Precision sensor from Bosch for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy Adafruit 2652
zł74.71
24h
Available quantity: 3
Available
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
zł99.29
24h
Available quantity: 2
Available
Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
zł65.65
24h
Available quantity: 3
Available
Other products in the same category (16)
Module with a temperature and humidity sensor based on the HTU31 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4832
zł39.52
24h
Available quantity: 3
Available
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
zł159.90
24h
Available quantity: 3
Available
No product available!
A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4566
zł23.95
24h
Available quantity: 1
Available
Module with temperature and humidity sensor DHT11. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020011
zł22.00
24h
Available quantity: 3
Available
Module with a digital temperature and humidity sensor based on the SHT31-F system. Communication via the I2C interface. Equipped with a Gravity DFRobot SEN0334 connector
zł73.16
24h
Available quantity: 2
Available
relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080, you can determine the relative humidity of the environment with up to 14 bits of resolution. Digilent 410-347
zł87.98
3 weeks
No product available!
High-end temperature and humidity sensor module, offering ±1.0% RH and ±0.1°C precision and full I2C communication. With 3.3 to 5V voltage compatibility, STEMMA QT connectors and IP67 protection, it is easy to integrate and resistant to harsh environmental conditions. Ideal for IoT projects, weather stations and automation systems requiring accurate measurements. Adafruit 6174
zł68.09
4 weeks
No product available!
Adafruit module with Si7021 temperature and humidity sensor. Sensor Sillicon Labs can measure temperature in the range of -10 ~ 125 ° C, and humidity in the range of 0-100 & RH. The sensor communicates using the I2C interface. Adafruit 3251
zł51.20
24h
Available quantity: 1
Available
LHT52 Indoor LoRaWAN Sensor US915 – air temperature and humidity sensor for LoRaWAN, IP52 - Seeed...
LHT52 Indoor LoRaWAN Air Temperature and Humidity Sensor US915 Seeed Studio 101990984 is a wireless air temperature and humidity sensor designed for smart home systems, offices, and industrial applications. Thanks to battery power, data logging, and LoRaWAN compatibility, it is suitable for environmental monitoring, building automation, and precision agriculture.
zł149.83
4 weeks
No product available!
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634
zł298.42
24h
Available quantity: 1
Available
Temperature and humidity module, -40C to +125C, 0 - 99.9% RH, AOSONG, RoHS
zł69.95
24h
Available quantity: 3
Available
Air humidity and temperature sensor with 1-Wire interface.
zł10.86
24h
Available quantity: 13
Available
Available
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716
zł75.89
24h
Available quantity: 1
Available
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C. SparkFun SEN-13905
zł112.74
24h
Available quantity: 2
Available
I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248