STEMMA QT MS8607 Pressure Humidity Temperature PHT Sensor - module with pressure, humidity and temperature sensor
ID: 587301
5906623430680
zł73.57
Tax included
zł59.81 tax excl.
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716
Description
Module with a pressure, temperature and humidity sensor based on the MS8607 system. The accuracy of the pressure measurement is +/- 2 hPa, the relative humidity is +/- 3% rH, and the temperature is measured with an accuracy of 1°C. One of the standout features of the MS8607 is its low power consumption. Each sensor is factory calibrated and the calibration constants stored in the system itself. The module is powered with the voltage from 3 V to 5 V, and communication is via the I2C interface (STEMMA QT connector). It is perfect for robotics as a measuring sensor, e.g. in weather stations. Full documentation is available on the product page.
Features
- Integrated pressure, humidity and temperature sensor
- Operating range: 10 to 2000 mbar, 0% RH to 100% RH, -40 to 85°C
- High resolution module: 0.016 mbar, 0.04% RH, 0.01°C
- Fully factory calibrated
- I2C interface
- I2C address: 0x40, 0x76
- Supply voltage: 3 V to 5 V
- Dimensions: 25.7 x 17.8 x 4.6 mm
Kit contains
- MS8607 Pressure Humidity Temperature PHT Sensor
- 6-pin goldpin male connector
587301
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Power supply voltage
- 3 - 5 V
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł11.89
24h
Available quantity: 4
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł11.94
Delivery date unknown
No product available!
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.50
24h
Available quantity: 26
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.90
24h
Available quantity: 10
Available
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł105.20
Delivery date unknown
No product available!
Other products in the same category (16)
Module with digital barometer BMP388. It enables pressure measurement in the range from 300 to 1250 hPa and communicates via I2C or SPI. Waveshare BMP388 Barometric Pressure Sensor
zł45.63
24h
Available quantity: 2
Available
Module with digital barometer BMP581. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 5 Pa and communicates via I2C or SPI. SparkFun SEN-20170
zł109.90
24h
Available quantity: 1
Available
Module with digital barometer BMP384. It enables pressure measurement in the range from 300 to 1250 hPa with 24-bit resolution and communicates via I2C. SparkFun SEN-19833
zł91.00
24h
Available quantity: 3
Available
Module with digital barometer BMP581. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 5 Pa and communicates via I2C. SparkFun SEN-20171
zł124.16
24h
Available quantity: 2
Available
LPS28DFW absolute pressure sensor module. The chip features a wide measurement range of 260 to 1260 hPa or 260 to 4060 hPa and a high accuracy of 0.5 hPa. It communicates via an I2C interface. SparkFun SEN-21222
zł154.12
24h
Available quantity: 2
Available
LPS28DFW absolute pressure sensor module. The chip features a wide measurement range of 260 to 1260 hPa or 260 to 4060 hPa and a high accuracy of 0.5 hPa. It communicates via an I2C interface. SparkFun SEN-21221
zł152.13
24h
Available quantity: 2
Available
The MS5803-14BA waterproof pressure sensor module. It allows measurement from 0 to 14 bar and communicates via SPI or I2C interface. SparkFun SEN-12909
zł388.99
3 weeks
No product available!
LPS35HW waterproof barometer module. It can measure pressure from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4258
zł73.47
24h
Available quantity: 3
Available
BMP390 digital barometer module. Measures pressure from 300 to 1250 hPa and temperature from -40℃ to 85℃. It communicates via an I2C or SPI interface. Waveshare BMP390 Barometric Pressure Sensor
zł47.06
24h
Available quantity: 2
Available
LPS22DF digital barometer module. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Pololu 2898
zł44.16
24h
Available quantity: 2
Available
Module with the MS5611 sensor, allowing measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer. It comes with a connector for self-assembly. modGY-63
zł28.71
4 weeks
No product available!
Gravity: High Accuracy is a multifunctional environmental sensor with Gravity I2C and UART output. Perfect for weather station projects. DFRobot SEN0501
zł136.06
4 weeks
No product available!
A precise pressure and temperature sensor that supports I2C communication, which makes it easy to integrate with microcontrollers such as Arduino. With its compact design and versatile use in navigation, altitude measurement or GPS assistance, it is ideal for IoT projects and navigation systems. DFRobot SEN0372
zł27.68
24h
Available quantity: 5
Available
The KAmod BMP280 contains a precise BMP280 sensor manufactured by Bosch Sensortec, which enables the measurement of atmospheric pressure and temperature. All key signals of the miniature BMP280 sensor are routed on the module board, facilitating its use in modular applications. Communication is carried out via SPI or I2C interfaces equipped with voltage level translation circuits.
zł19.90
24h
Available quantity: 107
Available
KAmod BMP390 contains a precise BMP390 sensor manufactured by Bosch Sensortec, enabling the measurement of atmospheric pressure and temperature. All key signals of the miniature BMP390 sensor are routed on the module board, facilitating its use in modular applications. Communication is carried out via SPI or I2C interfaces equipped with voltage level translation circuits.
zł31.89
24h
Available quantity: 62
Available
BMP390 is a compact, energy-efficient barometric pressure sensor with high accuracy, designed for precise altitude measurement and mobile applications. Thanks to its I2C/SPI interfaces and SMD mounting, it is widely used in embedded projects and wearable devices.
zł13.90
24h
Available quantity: 1
Available
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716