STEMMA QT LPS22 Pressure Sensor - module with a pressure sensor

LPS22DF digital barometer module. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Pololu 2898

Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812

Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476

LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator

Module with digital barometer BMP388. The system measures pressure in the range from 300 to 1250 hPa and temperature from -40 ℃ to 80 ℃. DFRobot SEN0251

Water pressure sensor with 3-pin Gravity interface. It enables the measurement of liquid pressure in the range from 0 to 1.6 MPa. It is supplied with the voltage of 5 V and has a linear output voltage from 0.5 to 4.5 V. DFRobot SEN0257

Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440

KAmod BMP390 contains a precise BMP390 sensor manufactured by Bosch Sensortec, enabling the measurement of atmospheric pressure and temperature. All key signals of the miniature BMP390 sensor are routed on the module board, facilitating its use in modular applications. Communication is carried out via SPI or I2C interfaces equipped with voltage level translation circuits.

A module with a digital barometer BMP390L dedicated to industrial applications. The system measures pressure in the range from 300 to 1250 hPa and temperature from -40℃ to 85℃. DFRobot SEN0423

Atmospheric pressure sensor, capable of measuring up to 4060 hPa, which allows it to be used even in underwater projects to a depth of about 40 meters. Thanks to high precision (±0.5 hPa) and a sampling rate of up to 200 Hz, it is also ideal for dynamic measurements of altitude and pressure in atmospheric conditions. The built-in metal port allows remote pressure measurement through a tube, and compatibility with the STEMMA QT system and ready-made libraries for Arduino and CircuitPython make integration with microcontrollers quick and easy. Adafruit 6067

The GY-BMP280 is an atmospheric pressure sensor module. It allows measurement in the range of 300 ... 1100 hPa with an accuracy of 1 hPa. The sensor uses I2C or SPI bus

Precision sensor from Bosch for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy Adafruit 2652

Energy-saving environmental sensor, enabling precise measurement of temperature in the range from -40℃ to +85℃ and atmospheric pressure from 300 to 1100 hPa. Supports I2C and SPI interfaces, and thanks to the FIFO function allows to minimize energy consumption - even to 0.5 μA in standby mode. Compatible with Arduino, Raspberry Pi and Micro:bit, it is ideal for use in DIY projects, educational projects and weather stations. Seeed Studio 110992164

Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193

Crowtail – BMP280 Barometer Sensor 2.0 is a compact digital sensor for measuring temperature, atmospheric pressure, and altitude, using the I2C interface. Intended for use in weather projects, mobile environmental systems, and consumer electronics.

DFRobot SEN0629 environmental module with a BME688 sensor enables precise measurement of temperature, humidity, pressure, and VOC, and supports AI-assisted gas analysis. Compatibility with I2C/SPI and broad functionality make it suitable for use in smart building systems, environmental monitoring, and industry.