BME280 sensor module (pressure, temperature, humidity) - Waveshare 15231
ID: 1180746
5906623422913
zł41.08
Tax included
zł33.40 tax excl.
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Waveshare BME280 Environmental Sensor
Description
Module with pressure, temperature and humidity sensor BME280. It allows you to read atmospheric pressure in the range from 300 to 1100 hPa with an accuracy of ± 1 hPa, temperature in the range from -40 to 85℃ with an accuracy of ± 1°C and humidity with an accuracy of ± 3%. The module communicates via the I2C or SPI interface. It has a built-in voltage level converter, so it can work with 3.3V or 5V systems. It is an ideal solution for home temperature measurement, as well as for measuring altitude when flying at high altitudes. Documentation with examples is available on the product page.
Features
- Pressure measurement: from 300 to 1100 hPa (resolution 0.18 Pa, accuracy ± 1hPa)
- Temperature measurement: -40 to 85℃ (resolution 0.01°C, accuracy ± 1°C)
- Humidity measuring range: 0 to 100% RH (resolution 0.008% RH, accuracy ± 2% RH)
- Converter of voltage levels 3.3/5V
- Supply voltage: from 3.3 V to 5 V
- I2C or SPI interface
- Dimensions: 27 x 20 mm
Kit contains
- BME280 Environmental Sensor module
- JST PH2.0 6-pin cable, 20 cm
1180746
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BME280
- Power supply voltage
- 3,3 V/5 V
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 227
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł78.42
24h
Available quantity: 16
Available
STM32 Nucleo-64 development board with STM32L476RGT6 MCU, supports Arduino and ST morpho connectivity
zł73.90
24h
Available quantity: 57
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
Delivery date unknown
No product available!
Other products in the same category (16)
Precision sensor from Bosch for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy Adafruit 2652
zł73.80
24h
Available quantity: 5
Available
Module with pressure and temperature sensor BMP280. It allows you to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Adafruit 2651
zł50.85
24h
Available quantity: 2
Available
Available
The GY-BMP280 is an atmospheric pressure sensor module. It allows measurement in the range of 300 ... 1100 hPa with an accuracy of 1 hPa. The sensor uses I2C or SPI bus
zł5.98
24h
Available quantity: 48
Available
Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192
zł60.63
24h
Available quantity: 2
Available
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
zł80.53
24h
Available quantity: 3
Available
Water pressure sensor with 3-pin Gravity interface. It enables the measurement of liquid pressure in the range from 0 to 1.6 MPa. It is supplied with the voltage of 5 V and has a linear output voltage from 0.5 to 4.5 V. DFRobot SEN0257
zł86.64
24h
Available quantity: 1
Available
I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248
zł112.72
24h
Available quantity: 2
Available
KAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2
zł27.90
24h
Available quantity: 192
Available
Module with digital barometer BMP388. The system measures pressure in the range from 300 to 1250 hPa and temperature from -40 ℃ to 80 ℃. DFRobot SEN0251
zł31.39
4 weeks
No product available!
Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.
zł45.77
4 weeks
No product available!
Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476
zł207.73
24h
Available quantity: 1
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
zł136.19
24h
Available quantity: 1
Available
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
zł109.00
24h
Available quantity: 3
Available
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440
zł84.89
24h
Available quantity: 3
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Waveshare BME280 Environmental Sensor