

zł169.76 tax excl.
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
Module with environmental sensors designed to work with the Raspberry Pi Pico. It combines the BME280 for temperature, humidity and pressure measurement, SGP40 for volatile organic compounds (VOC) detection, SHT31 for temperature measurement and TCS34725 for color detection. There is also a 1.14" LCD display on the board. The module is powered with the voltage of 3.3 V, and communication is via the I2C and SPI interface. It will be used in the projects of mobile robots, drones and weather stations. Full documentation with examples is available on the product wiki page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. SB Components 21314
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. SB Components 21352
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
No product available!
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173
Universal board equipped with a metalized hole grid with a pitch of 2.54 mm, enabling mounting using goldpin strips or directly on the surface, with markings facilitating the identification of signals
Audio module with DAC and headphone amplifier designed to work with the Raspberry Pi Pico. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM544
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM637
No product available!
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342
A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM639
Keyboard module designed for Raspberry Pi Pico. It is equipped with 16 buttons with RGB backlight. Pimoroni PIM551
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366