Automation 2040 W - extension module for home automation with Raspberry Pi Pico W

Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200

Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173

The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924

The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver

Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468

Module with a precise clock RTC DS3231. Communication via the I2C interface. Waveshare Pico-RTC-DS3231

Uninterruptible power supply module for Raspberry Pi Pico, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare Pico-UPS-A-EN

Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635

Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED

A set for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM640

The KamodRPI Pico Quad SSR is an add-on board for Raspberry Pi Pico featuring four solid-state relays (SSR), optoisolated digital inputs, and LEDs indicating input and output states. The module is ideal for building automation, robotics, and education, with automatic power source selection between micro USB and USB-C

Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM627

4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178

Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636

A base board that allows the Raspberry Pi Pico to control four DC motors or two stepper motors and eight servos, offering great flexibility for robotic projects. The board is equipped with dual H Bridge ICs to drive the motors, with full direction control and stopping functions, and power supplied via a terminal or servo connector, which increases its functionality. Additionally, thanks to the regulated 3.3V voltage, there is no need for a separate power supply for the connected Raspberry Pi Pico, simplifying the assembly process and integration with other devices. Kitronik 5329

A compact board for the Raspberry Pi Pico that allows you to control two DC motors with full direction control or one stepper motor in half-step mode. Based on the DRV8833 chip, it features built-in short-circuit, overcurrent, and thermal protection, ensuring safe and stable operation. The board offers additional GPIO connectors, power pins, and a built-in power switch and status LED. Kitronik 5331