New products
New products New products
zł9,349.00
4 weeks
zł173.58
Delivery date unknown
Pico-Environment-Sensor environmental module with sensors for Raspberry Pi Pico - Waveshare 20232
ID: 587054
5906623422616
zł163.90
Tax included
zł133.25 tax excl.
Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor
Description
Module with environmental sensors designed to work with the Raspberry Pi Pico. It combines the TSL25911FN for illuminance measurement, BME280 for temperature, humidity and pressure measurement, ICM20948 (3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer), LTR390-UV-1 for UV detection and SGP40 sensor for detection of volatile organic compounds (VOC). The module is powered by 5V and has extended pins, so it can be stacked. Communication takes place via the I2C interface. It will be used in the projects of mobile robots, drones and weather stations. Full documentation with examples is available on the product wiki page.
Pinout
Features
- Light intensity sensor TSL25911FN:
- Measuring range: 0 to 88,000 Lux
- I2C address: 0x29
- Temperature, humidity and pressure sensor BME280:
- Temperature measurement range: -40 to 85 ℃ (resolution 0.01 ℃, accuracy ± 1 ℃)
- Humidity measuring range: 0 to 100% RH (0.008% RH resolution, ± 3% RH accuracy, 1s response time, delay ≤ 2% RH)
- Pressure measurement range: 300 to 1100 hPa (resolution 0.18 Pa, accuracy ± 1 hPa)
- I2C address: 0x76
- ICM20948 9-DoF Sensor:
- Accelerometer:
- Resolution: 16 bit
- Measuring range (configurable): ± 2, ± 4, ± 8, ± 16g
- Working current: 68.9 uA
- Gyroscope:
- Resolution: 16 bit
- Measuring range (configurable): ± 250, ± 500, ± 1000, ± 2000 °/sec
- Working current: 1.23 mA
- Magnetometer:
- Resolution: 16 bit
- Measuring range: ± 4900 µT
- Working current: 90 uA
- I2C address: 0x68
- UV sensor LTR390-UV-1:
- Wavelength detection range: 280 nm to 430 nm
- I2C address: 0x53
- VOC sensor SGP40:
- Measuring range: 0 to 1000 ppm
- Response time: <10 s
- Start time: <60 s
- I2C address: 0x59
- Voltage: 5V
- Dimensions: 52 x 21 mm
587054
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 223
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł36.56
24h
Available quantity: 4
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł29.04
24h
Available quantity: 1
Available
Module with OLED display, 1.3" diagonal and 64x128 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-1.3
zł40.44
24h
Available quantity: 2
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 230
Available
Other products in the same category (16)
A base board that allows the Raspberry Pi Pico to control four DC motors or two stepper motors and eight servos, offering great flexibility for robotic projects. The board is equipped with dual H Bridge ICs to drive the motors, with full direction control and stopping functions, and power supplied via a terminal or servo connector, which increases its functionality. Additionally, thanks to the regulated 3.3V voltage, there is no need for a separate power supply for the connected Raspberry Pi Pico, simplifying the assembly process and integration with other devices. Kitronik 5329
zł89.36
24h
Available quantity: 5
Available
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
zł53.90
24h
Available quantity: 2
Available
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
zł41.35
24h
Available quantity: 5
Available
Audio module with DAC and headphone amplifier designed to work with the Raspberry Pi Pico. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM544
zł118.82
4 weeks
No product available!
A compact board that allows you to control up to 8 servos simultaneously, making it ideal for advanced robotic projects. Equipped with standard 3-pin connectors, it allows you to easily connect servos without soldering, and additional GPIO pins and a 3V power supply from Pico allow you to expand your projects with new devices. The board\'s power supply is stabilized, and additional features such as an on/off switch and reverse polarity protection increase its safety and convenience of use. Kitronik 5339
zł39.78
24h
Available quantity: 2
Available
A compact board for the Raspberry Pi Pico that allows you to control two DC motors with full direction control or one stepper motor in half-step mode. Based on the DRV8833 chip, it features built-in short-circuit, overcurrent, and thermal protection, ensuring safe and stable operation. The board offers additional GPIO connectors, power pins, and a built-in power switch and status LED. Kitronik 5331
zł51.30
3 weeks
No product available!
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
zł219.95
4 weeks
No product available!
The KamodRPI Pico Quad SSR is an add-on board for Raspberry Pi Pico featuring four solid-state relays (SSR), optoisolated digital inputs, and LEDs indicating input and output states. The module is ideal for building automation, robotics, and education, with automatic power source selection between micro USB and USB-C
zł71.91
24h
Available quantity: 137
Available
A programmable, retro-style console for the Raspberry Pi Pico, featuring a 96-LED 12x8 matrix, a speaker, and a vibration motor. The device features six control buttons and additional GPIO pins, allowing for project expansion and greater interactivity. Power is provided by three AA batteries housed in an ergonomic handle that also makes the console easier to hold. Kitronik 5347
zł100.90
24h
Available quantity: 1
Available
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
zł208.80
24h
Available quantity: 3
Available
The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924
zł95.19
24h
Available quantity: 2
Available
Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver
zł72.93
24h
Available quantity: 2
Available
Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635
zł268.87
24h
Available quantity: 1
Available
Programmable buzzer controller with six buttons, designed to work with Raspberry Pi Pico W and offering pinouts for many pins. It is ideal as a remote control for the Kitronik Autonomous Robotics (Buggy) platform, and thanks to its compact size and lack of a display, it is a cost-effective solution for controlling robots and vehicles in DIY projects. Kitronik 5353
zł57.58
24h
Available quantity: 3
Available
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376
zł48.70
24h
Available quantity: 2
Available
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
zł13.71
24h
Available quantity: 13
Available
Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor