

The module with environmental sensors is equipped with a Raspberry Pi Pico W. It is equipped with a pressure, humidity, temperature sensor, a microphone and an air quality sensor. The set is controlled by the RP2040 microcontroller board equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 264 KB RAM and 2 MB of external QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity.
The module is based on the BME280 sensor, which allows you to read the atmospheric pressure in the range from 300 to 1100 hPa with an accuracy of ± 1 hPa, temperature in the range from -40 to 85℃ with an accuracy of ± 1°C and humidity with an accuracy of ± 3%. On the board, the user will also find the PMSA003I air quality sensor, which uses the laser scattering technique and allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. The user also has a microphone to monitor the noise level.
The device is designed to work well on battery power. The Enviro board has a built-in RTC (real time clock) so you can periodically wake the microcontroller from sleep mode, read (and optionally connect to Wi-Fi), and then sleep again, giving you months of unlimited battery life. The set is dedicated to projects of weather stations. Examples of use along with the instruction manual are available on the project website.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
No product available!
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
No product available!
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
No product available!
Flexible 4-core cable, 500 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17257
No product available!
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
Audio module with DAC and headphone amplifier designed to work with the Raspberry Pi Pico. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM544
No product available!
A base board that allows the Raspberry Pi Pico to control four DC motors or two stepper motors and eight servos, offering great flexibility for robotic projects. The board is equipped with dual H Bridge ICs to drive the motors, with full direction control and stopping functions, and power supplied via a terminal or servo connector, which increases its functionality. Additionally, thanks to the regulated 3.3V voltage, there is no need for a separate power supply for the connected Raspberry Pi Pico, simplifying the assembly process and integration with other devices. Kitronik 5329
Keyboard module designed for Raspberry Pi Pico. It is equipped with 16 buttons with RGB backlight. Pimoroni PIM551
No product available!
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver
A set for building a digital LED clock designed to work with the Raspberry Pi Pico. It has a built-in precision RTC DS3231 chip, light sensor, buzzer and configuration buttons. Waveshare Pico-Clock-Green-EN
A module with a barcode and QR scanner designed to work with the Raspberry Pi Pico. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22441
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM627
No product available!
The KamodRPI Pico Safe Relay is an add-on board for Raspberry Pi Pico featuring four SPDT relays with galvanic isolation, optoisolated digital inputs, and LEDs indicating input and output states. The module is ideal for applications in building automation, robotics, and education, powered via micro USB or USB-C with automatic source selection.
Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200
A compact board that allows you to control up to 8 servos simultaneously, making it ideal for advanced robotic projects. Equipped with standard 3-pin connectors, it allows you to easily connect servos without soldering, and additional GPIO pins and a 3V power supply from Pico allow you to expand your projects with new devices. The board\'s power supply is stabilized, and additional features such as an on/off switch and reverse polarity protection increase its safety and convenience of use. Kitronik 5339
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173
Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM639