![Enviro Urban - module with environmental sensors and Raspberry Pi Pico W Enviro Urban - module with environmental sensors and Raspberry Pi Pico W](https://kamami.pl/65538-large_default/enviro-urban-module-with-environmental-sensors-and-raspberry-pi-pico-w-pim629.jpg)
![Enviro Urban - module with environmental sensors and Raspberry Pi Pico W Enviro Urban - module with environmental sensors and Raspberry Pi Pico W](https://kamami.pl/65538-large_default/enviro-urban-module-with-environmental-sensors-and-raspberry-pi-pico-w-pim629.jpg)
zł347.45 tax excl.
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The module with environmental sensors is equipped with a Raspberry Pi Pico W. It is equipped with a pressure, humidity, temperature sensor, a microphone and an air quality sensor. The set is controlled by the RP2040 microcontroller board equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 264 KB RAM and 2 MB of external QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity.
The module is based on the BME280 sensor, which allows you to read the atmospheric pressure in the range from 300 to 1100 hPa with an accuracy of ± 1 hPa, temperature in the range from -40 to 85℃ with an accuracy of ± 1°C and humidity with an accuracy of ± 3%. On the board, the user will also find the PMSA003I air quality sensor, which uses the laser scattering technique and allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. The user also has a microphone to monitor the noise level.
The device is designed to work well on battery power. The Enviro board has a built-in RTC (real time clock) so you can periodically wake the microcontroller from sleep mode, read (and optionally connect to Wi-Fi), and then sleep again, giving you months of unlimited battery life. The set is dedicated to projects of air quality stations. Examples of use along with the instruction manual are available on the project website.
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM639
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630
Shield with two relays for Raspberry Pi Pico, provides control of devices up to 250 VAC/3 A or 30 VDC/3 A, equipped with LEDs indicating the status of the relays and opto-isolation, ideal for home automation and other DIY projects
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
Uninterruptible power supply module for Raspberry Pi Pico, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare Pico-UPS-A-EN
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
Uninterruptible power supply module for Raspberry Pi Pico, allowing you to continue working and safely shut down after a power failure. Waveshare Pico-UPS-B
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU
Module with a precise clock RTC DS3231 dedicated to the Raspberry Pi Pico. Communication via the I2C interface. SB Components 21420
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM637
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629