HM01B0 QVGA Camera - module with QVGA camera HM01B0 320x320 for Raspberry Pi Pico
ID: 587976
5906623404506
zł90.41
Tax included
zł73.50 tax excl.
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
Description
Monochrome camera module with a resolution of 320x320 pixels with a HM01B0 sensor designed for the Raspberry Pi Pico. It is characterized by very low power consumption, resolution up to QVGA, 1-bit video data interface and line synchronization. This makes the camera an ideal camera for building machine vision projects and Always on Serivce applications with energy-saving microcontrollers. It uses 1, 2, 4 or 8 bit video interface for communication and I2C for register configuration. Full documentation and implementation examples are available on the product page.
Features
- Ultra Low Power Consumption (ULPIS) Image Sensor
- High sensitivity
- 320 x 320 active pixel resolution with QVGA window support
- Flexible 1-bit, 4-bit and 8-bit data interface
- Motion detection circuit with programmable ROI and detection threshold with digital output as an interrupt
- I2C serial interface
- Pixel size 3.6 µm x 3.6 µm
- Full image area of 1152 µm x 1152 µm
- Diagonal (optical format) 1.63 mm (1/11 inch)
- Scan mode: progressive
- 51 fps at 320 x 320, 60 fps at 320 x 240 (QVGA)
- CRA (maximum) 30º
- Power consumption: QVGA 60 fps <4 mW, QVGA 30 fps <2 mW
Kit contains
- HM01B0 QVGA Camera module
- Connecting cables
Connection diagram
587976
Data sheet
- Resolution
- 320 x 320 px
- Interface
- Parallel
- Sensor
- HM01NB0
- IR filter
- Yes
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 638
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
Regular pricezł29.90zł25.90
24h
Available quantity: 5
Available
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
zł138.13
Delivery date unknown
No product available!
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.10
24h
Available quantity: 51
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.19
24h
Available quantity: 208
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 53
Available
Other products in the same category (16)
Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635
zł268.87
24h
Available quantity: 1
Available
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173
zł525.86
24h
Available quantity: 2
Available
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
zł49.42
24h
Available quantity: 3
Available
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
zł20.61
24h
Available quantity: 2
Available
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
zł85.90
24h
Available quantity: 1
Available
Audio module with DAC and headphone amplifier designed to work with the Raspberry Pi Pico. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM544
zł118.82
4 weeks
No product available!
Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver
zł80.64
24h
Available quantity: 3
Available
Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553
zł131.14
24h
Available quantity: 1
Available
Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor
zł163.90
24h
Available quantity: 4
Available
A set for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM640
zł763.67
4 weeks
No product available!
The KamodRPI Pico Quad SSR is an add-on board for Raspberry Pi Pico featuring four solid-state relays (SSR), optoisolated digital inputs, and LEDs indicating input and output states. The module is ideal for building automation, robotics, and education, with automatic power source selection between micro USB and USB-C
zł71.91
24h
Available quantity: 141
Available
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM639
zł491.34
24h
Available quantity: 2
Available
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
zł208.80
24h
Available quantity: 3
Available
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
zł76.73
4 weeks
No product available!
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B
zł75.35
24h
Available quantity: 5
Available
A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories
zł1.89
24h
Available quantity: 82
Available
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315