zł1.54 tax excl.
A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories
A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors allow you to easily connect expansion modules and other accessories or use Raspberry Pi Pico with a breadboard.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924
Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
No product available!
Shield with two relays for Raspberry Pi Pico, provides control of devices up to 250 VAC/3 A or 30 VDC/3 A, equipped with LEDs indicating the status of the relays and opto-isolation, ideal for home automation and other DIY projects
A base board that allows the Raspberry Pi Pico to control four DC motors or two stepper motors and eight servos, offering great flexibility for robotic projects. The board is equipped with dual H Bridge ICs to drive the motors, with full direction control and stopping functions, and power supplied via a terminal or servo connector, which increases its functionality. Additionally, thanks to the regulated 3.3V voltage, there is no need for a separate power supply for the connected Raspberry Pi Pico, simplifying the assembly process and integration with other devices. Kitronik 5329
Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319
No product available!
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM639
A compact board for the Raspberry Pi Pico that allows you to control two DC motors with full direction control or one stepper motor in half-step mode. Based on the DRV8833 chip, it features built-in short-circuit, overcurrent, and thermal protection, ensuring safe and stable operation. The board offers additional GPIO connectors, power pins, and a built-in power switch and status LED. Kitronik 5331
No product available!
Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636
A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories