Module with environmental sensors dedicated for Raspberry Pi Pico and Raspberry Pi Pico W. It is equipped with a gas, pressure, temperature and humidity sensor BME688 and a light intensity sensor LTR-559. The user has a microphone for noise detection and all data can be presented on a 1.54" IPS LCD display. The BME688 is a chip specially developed for mobile applications where low energy consumption is a key requirement. The gas sensor in the BME688 can detect a wide range gases to measure air quality, including volatile organic compounds (VOC) from paints (such as formaldehyde), varnishes, paint strippers, cleaners, furniture, office equipment, adhesives and alcohol. The LTR-559 system is a proximity and light intensity sensor, which allows reading the illumination intensity from 0.01 to 64000 lux and detecting objects in a short distance (up to 5 cm). The set is dedicated to air control station projects in buildings .
Manufacturer
Responsible person
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
Extension module with a set of environmental sensors and an LCD display for Raspberry Pi minicomputers. Pimoroni PIM458
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Raspberry Pi SC0918
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM627
No product available!
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
No product available!
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM627
No product available!
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
No product available!
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM639
A set for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM640
No product available!
Extension module with a Raspberry Pi Pico W board with WiFi communication. The set is equipped with relays, buffer inputs, sink type outputs and analog inputs. Pimoroni PIM632
The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924
Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200
The Raspberry Pi Debug Probe is an affordable tool that combines a USB-UART debugger and converter. Includes the necessary hardware and wiring needed to quickly debug the Raspberry Pi Pico, RP2040 microcontrollers, and other ARM Cortex-based MCUs. Raspberry Pi SC0889
A data logging module dedicated to the Raspberry Pi Pico. It features an RTC clock, Micro SD slot and STEMMA QT connector. Adafruit 5703
Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173
A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories
Shield with two relays for Raspberry Pi Pico, provides control of devices up to 250 VAC/3 A or 30 VDC/3 A, equipped with LEDs indicating the status of the relays and opto-isolation, ideal for home automation and other DIY projects
Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635