zł49.06 tax excl.
A compact board for the Raspberry Pi Pico that allows you to control two DC motors with full direction control or one stepper motor in half-step mode. Based on the DRV8833 chip, it features built-in short-circuit, overcurrent, and thermal protection, ensuring safe and stable operation. The board offers additional GPIO connectors, power pins, and a built-in power switch and status LED. Kitronik 5331
Kitronik Motor Driver Board is a compact yet feature-rich board for the Raspberry Pi Pico, designed specifically for projects such as robotic buggies. It enables control of two motors simultaneously with full directional control – forward, reverse, and stop. Alternatively, the board can also be used to drive a stepper motor, supporting half-step mode (without micro-stepping).


The DRV8833 driver chip provides built-in short-circuit, overcurrent, and thermal protection, ensuring stable and safe operation. The board also features 4 additional GPIO connectors along with 3V and GND breakout pins from the Raspberry Pi Pico, allowing connection of sensors, switches, and other elements to extend project functionality. A built-in on/off switch and power status LED make it easy to monitor the board’s state and save energy when not in use. Power can be supplied via a screw terminal or servo connector, and the board also generates a regulated voltage that is supplied directly to the Raspberry Pi Pico through the 40-pin connector, eliminating the need for separate power.
To use the board, the Raspberry Pi Pico must have a soldered header and be securely seated in the connector. Kitronik has also prepared a MicroPython module and sample code, available on GitHub, which makes it quick to start programming in Thonny or another compatible editor. Note that due to the additional power consumption of the Pico W module, it is not recommended to use its wireless features with this board – standard operation remains unaffected. With its compact size, ease of use, and extensive functionality, this board is an excellent solution for anyone looking to develop robotic projects with the Raspberry Pi Pico.
Manufacturer
Responsible person
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
No product available!
Audio module with DAC and headphone amplifier designed to work with the Raspberry Pi Pico. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM544
No product available!
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
Uninterruptible power supply module for Raspberry Pi Pico, allowing you to continue working and safely shut down after a power failure. Waveshare Pico-UPS-B
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B
Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor
Keyboard module designed for Raspberry Pi Pico. It is equipped with 16 buttons with RGB backlight. Pimoroni PIM551
A power supply module with a LiPo and Li-Ion battery charger dedicated to the Raspberry Pi Pico boards. It has a built-in button and over-discharge and overload protection. Pimoroni PIM557
No product available!
Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319
No product available!
Module with a precise clock RTC DS3231 dedicated to the Raspberry Pi Pico. Communication via the I2C interface. SB Components 21420
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
A compact board for the Raspberry Pi Pico that allows you to control two DC motors with full direction control or one stepper motor in half-step mode. Based on the DRV8833 chip, it features built-in short-circuit, overcurrent, and thermal protection, ensuring safe and stable operation. The board offers additional GPIO connectors, power pins, and a built-in power switch and status LED. Kitronik 5331