Pico Air Monitoring Expansion - module with air quality sensor for Raspberry Pi Pico
ID: 1178277
5906623413508
zł237.29
Tax included
zł192.92 tax excl.
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
Description
The PMSA003 air quality sensor module is designed to work with the Raspberry Pi Pico. It uses the laser scattering technique and allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. The module is equipped with a 0.91" OLED display, which communicates via the I2C interface. The PMSA003 sensor uses the UART interface. The module will be used in air treatment devices and air quality monitors. Full documentation with examples is available on the product website.
Pinout
Features
- Particle measurement range: 0.3 to 1.0, 1.0 to 2.5, 2.5 to 10 µm
- Particle counting efficiency: 50% at 0.3 μm 98% at> = 0.5 μm
- Total response time ≤ 10 seconds
- Operating temperature range -10 to 60 ℃
- Operating humidity range 0 to 99%
- Storage temperature range -40 to 80 ℃
- MTTF ≥ 3 years
- UART interface
- 0.91 "OLED display
- Voltage: 5V
- Dimensions: 92 x 68 mm
1178277
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 413
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
Regular pricezł29.90zł25.90
Delivery date unknown
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. SB Components 21314
zł53.76
24h
Available quantity: 1
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. SB Components 21352
zł76.95
24h
Available quantity: 1
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 286
Available
Other products in the same category (16)
The KamodRPI Pico Safe Relay is an add-on board for Raspberry Pi Pico featuring four SPDT relays with galvanic isolation, optoisolated digital inputs, and LEDs indicating input and output states. The module is ideal for applications in building automation, robotics, and education, powered via micro USB or USB-C with automatic source selection.
zł70.92
24h
Available quantity: 121
Available
Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636
zł146.07
24h
Available quantity: 4
Available
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
zł16.70
24h
Available quantity: 5
Available
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
zł53.90
24h
Available quantity: 2
Available
A set for building a digital LED clock designed to work with the Raspberry Pi Pico. It has a built-in precision RTC DS3231 chip, light sensor, buzzer and configuration buttons. Waveshare Pico-Clock-Green-EN
zł105.66
4 weeks
No product available!
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
zł49.42
24h
Available quantity: 3
Available
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
zł14.37
24h
Available quantity: 3
Available
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
zł222.00
4 weeks
No product available!
A module with a barcode and QR scanner designed to work with the Raspberry Pi Pico. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22441
zł288.44
24h
Available quantity: 1
Available
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
zł75.77
24h
Available quantity: 2
Available
Universal board equipped with a metalized hole grid with a pitch of 2.54 mm, enabling mounting using goldpin strips or directly on the surface, with markings facilitating the identification of signals
zł9.90
24h
Available quantity: 410
Available
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
zł233.07
24h
Available quantity: 2
Available
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745
zł39.54
4 weeks
No product available!
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
zł76.48
24h
Available quantity: 2
Available
Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor
zł163.90
24h
Available quantity: 4
Available
A set for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM640
zł763.67
4 weeks
No product available!
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819