Fermion: Multifunctional Environmental Sensor - module with environmental sensors
ID: 1178535
5902186310131
zł123.16
Tax included
zł100.13 tax excl.
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500
Description
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. The module has a built-in microcontroller that converts raw data from chips to values in commonly used units (℃ and ° F for temperature,% for humidity, kPa for atmospheric pressure, lx for illuminance and mw / m² for UV light). The user has two communication interfaces (UART and I2C) and complete Arduino and Python libraries at his disposal.
The BMP280 is a pressure and temperature sensor. It allows you to read the atmospheric pressure in the range from 300 to 1100 hPa with an accuracy of ± 1 hPa and the temperature in the range from -40 to 85 ℃ with an accuracy of ± 1 ° C. It is an ideal solution for home temperature measurements as well as for measuring altitude when flying at high altitudes.
The SHTC3 from Sensirion is a digital temperature and humidity sensor. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. It offers a high accuracy of ± 2% RH and ± 0.2 ° C.
ML8511 is a UV light sensor. Enables the measurement of the intensity of UV radiation. It is equipped with an internal amplifier. The module can measure the intensity for both the UV-A (320 - 400nm) and the UV-B (280 - 320nm) waves. It generates an analog voltage at its output that is linearly related to the measured intensity of UV radiation.
The VEML7700 is a light intensity sensor. It has a large measuring range (0-120Klx) and an accuracy of 0.0036 lx / ct.
The high accuracy and small size of the module make it suitable for indoor and outdoor environmental monitoring systems. Full documentation with examples of use is available on the product page.
Features
BMP280
- Pressure measurement: from 300 to 1100 hPa
- Pressure measurement accuracy: ± 1 hPa
- Temperature measurement: -40 to 85 ℃
- Temperature measurement accuracy: ± 1°C
SHTC3
- Relative humidity
- Measurement range: 0% to 100%
- Typical accuracy: ± 2% RH
- Resolution: 0.01% RH
- Temperature
- Measurement range: -40°C to + 125°C
- Typical accuracy: ± 0.2°C
- Resolution: 0.01 ° C
ML8511
- Photodiode sensitive to UV-A and UV-B
- Built-in operational amplifier
- Interface: analog (voltage output 1.0 - 2.8 VDC)
- Wavelength: UV-A (320 - 400nm), UV-B (280 - 320nm)
VEML7700
- Measurement range: 0-120 Klx
- Accuracy: 0.0036 lx/ct
General
- Working voltage: 3.3V DC
- Working current: 35 mA
- Output signal: I2C, UART
- Working temperature: -20 to 70 ℃
- Dimensions: 30 x 20.5 mm
Kit contains
- Fermion: Multifunctional Environmental Sensor
- 2 x 6-pin male goldpin connector
1178535
Data sheet
- Interface
- Sygnał analogowy
- Type of sensor
- BMP280
- Power supply voltage
- 3,3 V
- Sensor type
- Akcelerometr, żyroskop, magnetometr i barometr
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Gravity: Analog TDS Sensor / Meter is an analog water purity measurement module. It is powered by 3.3 ... 5.5V voltage and has an analogue output interface. Module compatible with Arduino. DFRobot SEN0244
zł55.51
24h
Available quantity: 1
Available
Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392
zł82.10
24h
Available quantity: 1
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.35
24h
Available quantity: 386
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 118
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
24h
Available quantity: 171
Available
Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460
zł202.34
24h
Available quantity: 1
Available
Other products in the same category (16)
LPS22DF digital barometer module. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Pololu 2898
zł46.51
24h
Available quantity: 1
Available
Kit with MPX5700AP pressure sensor, syringe and tube. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020248
zł330.80
4 weeks
No product available!
Module with a digital barometer LPS22. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4633
zł38.50
24h
Available quantity: 2
Available
Pressure sensor module with I2C interface (MPL115A2)
zł44.90
24h
Available quantity: 19
Available
1.5 hPa resolution pressure sensor from Freescale. The sensor is soldered onto a PCB with 10K pull-up resistors on the I2C pins. Adafruit 992
zł53.01
24h
Available quantity: 1
Available
KAmodLPS25HB is a module that allows the measurement of atmospheric pressure in the range of 260-1260hPa with a resolution of 0.01hPa, and thanks to the embedded regulator and voltage translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V.
zł40.90
24h
Available quantity: 189
Available
LPS28DFW absolute pressure sensor module. The chip features a wide measurement range of 260 to 1260 hPa or 260 to 4060 hPa and a high accuracy of 0.5 hPa. It communicates via an I2C interface. SparkFun SEN-21221
zł152.13
24h
Available quantity: 2
Available
Atmospheric pressure sensor, capable of measuring up to 4060 hPa, which allows it to be used even in underwater projects to a depth of about 40 meters. Thanks to high precision (±0.5 hPa) and a sampling rate of up to 200 Hz, it is also ideal for dynamic measurements of altitude and pressure in atmospheric conditions. The built-in metal port allows remote pressure measurement through a tube, and compatibility with the STEMMA QT system and ready-made libraries for Arduino and CircuitPython make integration with microcontrollers quick and easy. Adafruit 6067
zł65.69
24h
Available quantity: 2
Available
Precision sensor from Bosch for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy Adafruit 2652
zł75.58
24h
Available quantity: 3
Available
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716
zł75.73
24h
Available quantity: 1
Available
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł105.20
24h
Available quantity: 1
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
zł75.68
24h
Available quantity: 7
Available
Module with digital barometer BMP581. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 5 Pa and communicates via I2C or SPI. SparkFun SEN-20170
zł109.90
24h
Available quantity: 1
Available
Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476
zł146.44
3 weeks
No product available!
Module with pressure and temperature sensor BMP280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM411
zł57.97
24h
Available quantity: 4
Available
Module with pressure and temperature sensor BMP280. It allows you to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Adafruit 2651
zł56.86
4 weeks
No product available!
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500