Gravity: PM2.5 Air Quality Sensor - module with PM2.5 dust sensor
ID: 588813
5906623407255
zł202.34
Tax included
zł164.50 tax excl.
Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460
Description
Module with a PM2.5 laser dust sensor, which allows for a precise analysis of the amount of pollutants in the environment. With stable performance, low noise and very low power consumption, it is suitable for air conditioners, smart purifiers and other air quality IoT projects. The module communicates via the I2C (Gravity) interface and is powered by 5 V. Full documentation is available on the product Wiki page.
Features
- Measuring range: 1 to 500 µg/m3 (effective range), 1000 µg/m3 (maximum range)
- Resolution: 1µg/m3
- Stability time: 10 seconds after switching on
- Particle size (3 channels): 1 µm, 2.5 µm, 10 µm
- I2C interface
- I2C address: 0x19
- Supply voltage: 5V
- Operating voltage of the logic part: 3.3 V
- Working temperature: -10 to 60 ℃
- Working humidity: 10% to 95% RH
- Dimensions: 67 x 40 x 14 mm
Kit contains
- Gravity: PM2.5 Air Quality Sensor
- Gravity cable
588813
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 226
Available
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.66
Delivery date unknown
No product available!
The expansion board is designed for DFRduino M0 or Bluno M0 sets. The board has 31 GPIO pins (including 6 PWM and 6 ADC inputs), UART, I2C and SPI interfaces. The pins are color coded according to the Gravity standard. DFRobot DFR0412
zł44.59
24h
Available quantity: 1
Available
A set of 10 cables, 30 cm long, compliant with the Gravity standard. DFRobot FIT0513
zł27.58
24h
Available quantity: 6
Available
Other products in the same category (16)
Module with gas sensor designed to monitor indoor air quality. It was based on the AMS CCS811 system that allows the detection of volatile organic compounds (VOCs) in the air. Digilent 410-386
zł174.70
24h
Available quantity: 1
Available
PM2.5 dust sensor powered by 5V, communication via the UART interface. Sharp GP2Y1051AU0F
zł48.04
24h
Available quantity: 2
Available
Total suspended particulate (TSP) sensor that allows you to measure the particle concentration from 1 to 100 μm. SDS198
zł435.31
4 weeks
No product available!
Air quality sensor module based on SGP30 system. The board has been equipped with Qwiic connectors. SparkFun SEN-16531
Regular pricezł140.15zł89.02
24h
Available quantity: 4
Available
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
zł136.19
24h
Available quantity: 1
Available
Sharp GP2Y1010AU0F dust and particle concentration sensors. It is supplied with the voltage from 5 to 7V. Has an analog output. DFRobot SEN0144
zł61.46
24h
Available quantity: 4
Available
Module with PM2.5 HM3301 dust sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020613
zł150.23
24h
Available quantity: 1
Available
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
zł49.16
24h
Available quantity: 3
Available
Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392
zł72.82
24h
Available quantity: 1
Available
Module with air quality sensor SGP30. It allows you to read the concentration of VOC (TVOC) and eCO2 and communicates via the I2C interface. Pimoroni PIM480
zł102.93
24h
Available quantity: 1
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens® technology by Sensirion and provides information on air quality. Waveshare SGP40 VOC Sensor
zł61.61
4 weeks
No product available!
Air quality sensor module PMSA003I. It allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. Adafruit 4632
zł228.94
24h
Available quantity: 1
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł74.80
24h
Available quantity: 2
Available
Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460
zł202.34
24h
Available quantity: 1
Available
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
zł208.80
24h
Available quantity: 3
Available
The PMSA003 air quality sensor module is designed for the Raspberry Pi. It allows you to analyze the amount of pollutants based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 20768
zł247.80
4 weeks
No product available!
Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460