Sharp GP2Y1010AU0F Compact optical Dust Sensor
ID: 581671
5906623406685
zł61.46
Tax included
zł49.97 tax excl.
Sharp GP2Y1010AU0F dust and particle concentration sensors. It is supplied with the voltage from 5 to 7V. Has an analog output. DFRobot SEN0144
Description
The Sharp GP2Y1010AU0F air pollution sensor detects particles with a diameter greater than 0.8 μm. It consists of an infrared emitting diode (IRED) and a photo transistor that detects light reflected from dust. It is particularly effective in detecting very fine particles such as cigarette smoke. In addition, the sensor can distinguish smoke from dust based on the output voltage formula. The sensor has a low current consumption, and the output voltage is linearly correlated with the detected contamination level. GP2Y1010AU0F can be used in areas such as air conditioning systems and home air quality monitoring stations. A user manual and a sample program are available on the product wiki page.
Features
- Sensitivity: 0.5V/(100μg/m3)
- Measurement range: 500 μg/m3
- Analogue output proportional to the measured dust density
- Supply voltage: 5 to 7 V
- Current consumption: 11 mA (max. 20 mA)
- Working temperature: -10 to 65°C
Kit contains
- Dust sensor Sharp GP2Y1010AU0F
- Cable
581671
Data sheet
- Interface
- Sygnał analogowy
- Type of sensor
- inny
- Power supply voltage
- 5 V
- Concentration measurement
- Cząstek stałych
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 79
Available
Available
Other products in the same category (16)
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
zł51.89
4 weeks
No product available!
The PMSA003 air quality sensor module is designed for the Raspberry Pi. It allows you to analyze the amount of pollutants based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 20768
zł247.80
24h
Available quantity: 1
Available
BME688 integrated gas, pressure, temperature and humidity sensor module housed in a single MEMS package. It features a Grove connector and communicates via an I2C or SPI interface. Seeed Studio 114992989
zł165.14
24h
Available quantity: 3
Available
Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. Planter PMSA003-C
zł94.89
4 weeks
No product available!
Indoor air quality measurement module, combining two high-end Sensirion sensors – SCD41 and SEN55. It offers a comprehensive set of measurements, including CO2 concentration, volatile organic compounds (VOC), suspended dust (PM1.0, PM2.5, PM4, PM10), as well as temperature and relative humidity. SparkFun SEN-25200
zł709.81
3 weeks
No product available!
A sensor used to detect pollutants in the air by measuring gases such as hydrogen, ethanol and carbon monoxide. It is used in various areas, such as the food industry, chemical industry, air quality control in laboratories and environmental monitoring. Figaro TGS2600
zł25.72
24h
Available quantity: 9
Available
BME688 integrated gas, pressure, temperature and humidity sensor module in a single MEMS housing. It is equipped with an I2C and SPI interface. It has built-in AI functions. Waveshare BME688 Environmental Sensor
zł102.93
24h
Available quantity: 1
Available
Digital gas sensor solution that senses a wide range of Total Volatile Organic Compounds (TVOCs), including equivalent carbon dioxide (eCO2) and metal oxide (MOX) levels, intended for indoor air quality monitoring in personal devices such as watches and phones, but we’ve put it on a breakout board so you can use it as a regular I2C device. SEN-14193
zł193.38
24h
Available quantity: 2
Available
Air quality sensor module based on the ENS160 system. It communicates via the I2C or SPI interface. DFRobot SEN0515
zł69.22
24h
Available quantity: 2
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł79.42
24h
Available quantity: 1
Available
Air quality sensor module based on the ENS160 system. It communicates via the I2C interface (Gravity connector). DFRobot SEN0514
zł97.10
24h
Available quantity: 2
Available
ENS160 gas sensor module to measure the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via an I2C or SPI interface. SparkFun SEN-20844
zł119.84
24h
Available quantity: 3
Available
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply. Seeed Studio 101020078
zł58.12
24h
Available quantity: 3
Available
PM2.5 dust sensor powered by 5V, communication via the UART interface. Sharp GP2Y1051AU0F
zł48.04
24h
Available quantity: 3
Available
The SCD-40 CO2, temperature and humidity sensor module provides high accuracy readings. It is equipped with a Qwiic connector and communicates via an I2C interface. SparkFun SEN-22395
zł484.35
24h
Available quantity: 1
Available
Wireless sensor with LoRaWAN network communication. Dedicated to long-distance industrial data acquisition with a wide measurement range of CO2 from 400 to 10000 ppm, temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992869
Regular pricezł748.37zł639.60
24h
Available quantity: 1
Available
Sharp GP2Y1010AU0F dust and particle concentration sensors. It is supplied with the voltage from 5 to 7V. Has an analog output. DFRobot SEN0144