BME680 Breakout - module with 4in1 environmental sensor
ID: 587090
606034877634
zł115.82
Tax included
zł94.16 tax excl.
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
Description
A module with an advanced 4-in-1 sensor that measures environmental conditions such as the concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. It is based on the BOSCH BME680 MEMS system and can measure humidity with an accuracy of ± 3%, barometric pressure with an absolute accuracy of ± 1 hPa and temperature with an accuracy of ± 1.0°C. It will be used in projects involving air condition monitoring, e.g. in home automation, small weather stations or the Internet of Things (IoT). Thanks to the technology used, it has a small size and is characterized by low energy consumption. The module communicates via the I2C interface and is supplied with the voltage from 2 to 6 V. The documentation with the library and examples in Python is available in the GitHub repository.
Features
- Relative humidity:
-
- Measurement range: 0% to 100%
- Accuracy: ± 3% RH
- Resolution: ± 0.008% RH
- Temperature:
-
- Measurement range: -40°C to 85°C
- Accuracy: ± 0.5°C to ± 1°C
- Resolution: 0.01°C
- Pressure
-
- Working range: 300 hPa to 1100 hPa
- Relative Accuracy: ± 12Pa
- Absolute accuracy: ± 60Pa
- Resolution: 0.18Pa, the highest oversampling
- Air quality measurement range: 0-500 (the higher the value, the worse the air condition)
- Reverse polarity protection
- Compatible with all Raspberry Pi and Arduino models
- Supply voltage: 2 to 6 V
- I2C interface
- I2C address: 0x77
- Dimensions: 19 x 19 x 2.75 mm
Kit contains
- BME680 Breakout module
- Straight male connector 1x5
- Angle female connector 1x5
587090
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BME680
- Power supply voltage
- 2 - 6 V
- Concentration measurement
- VOC
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 82
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
Module with pressure and temperature sensor BMP280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM411
zł57.97
24h
Available quantity: 4
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
zł75.68
24h
Available quantity: 7
Available
Expander with two I2C connectors and one SPI for Raspberry Pi Pico. It has sockets compatible with Pimoroni Breakout modules. Pimoroni PIM547
zł45.26
24h
Available quantity: 1
Available
Other products in the same category (16)
MH-Z16 carbon dioxide sensor with Grove connector. It communicates via the UART interface. Seeed Studio 101020067
zł563.83
24h
Available quantity: 1
Available
Sensor that detects the concentration of ozone. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0472
zł817.00
4 weeks
No product available!
Module with an ambient oxygen concentration sensor. The system allows you to measure the oxygen volume in the range up to 25% with a resolution of 0.15%. The module communicates via the I2C interface. DFRobot SEN0322
zł371.12
24h
Available quantity: 1
Available
Module with a formaldehyde sensor made in MEMS technology. It allows gas detection in the range of 0 to 3 ppm and has an analog output. DFRobot SEN0563
zł23.95
24h
Available quantity: 4
Available
Module with gas sensor SGP30. It allows you to measure the content of total volatile organic compounds (TVOC), carbon dioxide equivalent (eCO2), ethanol and H2 in the air. M5Stack U088
zł74.89
24h
Available quantity: 1
Available
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
zł110.07
24h
Available quantity: 2
Available
Module with an analog MQ6 propane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0131
zł32.83
24h
Available quantity: 1
Available
Module with a CO2 sensor based on the XENSIV PAS CO2 system from Infineon. It enables precise measurement of CO2 concentration in ppm via I2C, UART and PWM interfaces. SparkFun SEN-2295
zł339.00
3 weeks
No product available!
Module with integrated BME688 gas, pressure, temperature and humidity sensor placed in one MEMS housing. It is equipped with an I2C interface. Adafruit 5046
zł101.84
4 weeks
No product available!
Module with an analog MQ5 LPG sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0130
zł32.83
24h
Available quantity: 1
Available
Module with LPG gas concentration sensor (MQ-6) in the range of 200 - 10,000 ppm. The module has an analogue output and a digital output triggered by exceeding the threshold of sensitivity. modMQ-6
zł6.89
24h
Available quantity: 6
Available
Volatile gas sensor module, including LPG, natural gas, natural gas
zł22.90
24h
Available quantity: 5
Available
Module with gas sensor designed to monitor indoor air quality. It was based on the AMS CCS811 system that allows the detection of volatile organic compounds (VOCs) in the air. Digilent 410-386
zł174.70
24h
Available quantity: 1
Available
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
zł51.89
24h
Available quantity: 2
Available
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
zł136.19
24h
Available quantity: 2
Available
Module with an analog MQ8 hydrogen sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0133
zł51.72
24h
Available quantity: 2
Available
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357