STEMMA QT HTU31 Temperature & Humidity Sensor - module with a temperature and humidity sensor
ID: 587282
5906623430512
zł39.52
Tax included
zł32.13 tax excl.
Module with a temperature and humidity sensor based on the HTU31 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4832
Description
Module with a temperature and humidity sensor based on the HTU31 system. It has an accuracy of ± 3% when measuring relative humidity from 20 to 100% and an accuracy of ± 0.2°C when measuring temperatures from 0 to 100°C. The module is compatible with 3.3 V and 5 V controllers, and communication is via the I2C interface (STEMMA QT connector).
Features
- Temperature measurement range: -40 to 125°C
- Temperature measurement accuracy: ± 0.3°C
- Humidity measuring range: 0 to 100% RH
- Accuracy of humidity measurement: ± 2% RH
- I2C interface (address 0x40 or 0x41)
- Supply voltage: 3.3 V to 5 V
- Dimensions: 25.5 x 17.7 x 4.6 mm
Kit contains
- STEMMA QT HTU31 Temperature & Humidity Sensor
- 6-pin goldpin male connector
587282
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł11.89
24h
Available quantity: 8
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł11.94
Delivery date unknown
No product available!
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.21
24h
Available quantity: 20
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.50
24h
Available quantity: 32
Available
Module with a temperature and humidity sensor based on the SHT40 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4885
zł28.70
Delivery date unknown
No product available!
Module with integrated BME688 gas, pressure, temperature and humidity sensor placed in one MEMS housing. It is equipped with an I2C interface. Adafruit 5046
zł101.93
24h
Available quantity: 3
Available
A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4566
zł23.95
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with light intensity sensor LTR-303. It offers a measuring range from 1 to 65535 lux and a 16-bit resolution. Communication takes place using I2C. Adafruit 5610
zł28.39
4 weeks
No product available!
zł13.19
24h
Available quantity: 19
Available
Module with ENS160 gas sensor for measuring the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via the I2C or SPI interface. Adafruit 5606
zł129.42
24h
Available quantity: 1
Available
Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611
zł31.87
24h
Available quantity: 5
Available
Module with a voltage level converter from 5 V to 3.3 V, intended for use in the STEMMA QT/Qwiic system. It has a built-in voltage stabilizer providing 3.3 V power supply with a current of up to 500 mA. Adafruit 5637
zł15.13
24h
Available quantity: 5
Available
Clock signal generator with a frequency of 8 kHz to 160 MHz based on the SI5351A integrated circuit. Communication with the module takes place via the I2C bus. Adafruit 5640
zł41.21
24h
Available quantity: 3
Available
LPS35HW waterproof barometer module. It can measure pressure from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4258
zł73.47
24h
Available quantity: 3
Available
Module with I2C driver based on the HT16K33 chip. Dedicated to 7-segment displays. It is equipped with STEMMA QT connectors. Adafruit 1271
zł50.50
24h
Available quantity: 2
Available
A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776
zł32.14
24h
Available quantity: 8
Available
Module with 12-channel MPR121 capacitive touch sensor. The board is equipped with a Stemma QT connector and communicates via the I2C interface. Adafruit 4830
zł36.97
24h
Available quantity: 1
Available
Module with 16-bit AD5693R DAC converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 5811
zł57.47
24h
Available quantity: 3
Available
Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810
zł36.85
24h
Available quantity: 3
Available
Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048
zł32.51
24h
Available quantity: 2
Available
Module with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836
zł29.10
24h
Available quantity: 4
Available
High-quality OV5640 camera with a 5 MP sensor, 120° wide-angle lens, and support circuitry, ready to work with Pico or Pico W. Adafruit 5949
zł137.69
24h
Available quantity: 1
Available
The VCNL4200 sensor module combines distance detection and ambient light measurement, ideal for applications such as robotics and home automation. Thanks to infrared technology, the detection range is up to 1.5 meters, and the built-in ALS sensor allows you to measure light intensity in the range of 0.003 to 1570 lux, making it a versatile solution for monitoring lighting conditions. Adafruit 6064
zł34.99
4 weeks
No product available!
Module with a temperature and humidity sensor based on the HTU31 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4832