 
        
           
        
           
         
           
          zł23.45 tax excl.
A module with a fan controller and a temperature sensor based on the EMC2101 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4808
A module with a fan controller and a temperature sensor based on the EMC2101 system. It allows you to easily add cooling to the device under construction. The EMC2101 system generates the PWM signal needed to control the fan and provides feedback on the temperature. It allows you to configure the fan operation in such a way that the system, based on the measured temperature, adjusts the rotation speed (LUT table). The user can thus reduce the noise generated by active cooling in an already existing device, where the fan runs continuously at full speed. The controller can work with most fans used in PC computers. The module is compatible with 3.3 V and 5 V controllers, and communication is via the I2C interface (STEMMA QT connector). Full documentation is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
 No product available!
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
 No product available!
Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681
 No product available!
Adapter dedicated to the Nintendo Wii Nunchuck. It allows you to connect the controller to the development board via the I2C interface. Adafruit 4836
Module with EEPROM 24LC32 memory with a capacity of 32 kBit (4 kB). Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5146
Real time clock (RTC) module PCF8523. It uses the STEMMA QT connector and communicates via the I2C interface. Adafruit 5189
ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316
Module with 9-axis IMU sensor BNO055. It has a built-in processing chip that returns orientation in 3D space. Communicates via I2C. Adafruit 4646
The module with the buffer of the I2C bus based on the TCA4307 system. It allows you to connect I2C devices with active power supply. Equipped with a STEMMA QT connector. Adafruit 5159
 No product available!
Module with light intensity sensor LTR-303. It offers a measuring range from 1 to 65535 lux and a 16-bit resolution. Communication takes place using I2C. Adafruit 5610
Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161
This adapter allows you to quickly connect Sensirion SEN6x sensors to microcontrollers and minicomputers. An integrated JST GH connector, 3.3V regulator, and logic level converter ensure full compatibility with 3.3V and 5V systems. Thanks to the STEMMA QT connector, the adapter supports I2C communication and works with Raspberry Pi, Arduino, Feather, and Sensirion libraries. Adafruit 6331
Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048
The VCNL4200 sensor module combines distance detection and ambient light measurement, ideal for applications such as robotics and home automation. Thanks to infrared technology, the detection range is up to 1.5 meters, and the built-in ALS sensor allows you to measure light intensity in the range of 0.003 to 1570 lux, making it a versatile solution for monitoring lighting conditions. Adafruit 6064
Module with a 3-axis LIS331HH accelerometer with a configurable measuring scale of ± 6g/±12g/±24g. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4626
 No product available!
Module with a logarithmic digital potentiometer based on the DS1841 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4570
Module with a 3-axis magnetic field sensor MMC5603. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5579
 
                    A module with a fan controller and a temperature sensor based on the EMC2101 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4808