STEMMA QT LSM6DSOX + LIS3MDL 9 DoF - IMU 9 DoF module
ID: 587285
5906623430543
zł113.52
Tax included
zł92.29 tax excl.
A module with an acceleration and rotational speed sensor based on the LSM6DSOX system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C, SPI or I3C interface. Adafruit 4517
Description
9 DoF module with a 3-axis accelerometer and a 3-axis gyroscope based on the LSM6DSOX system and the 3-axis magnetometer LIS3MDL. The LSM6DSOX allows you to measure the acceleration relative to the Earth and the rotational speed, and the LIS3MDL the magnetic field, which allows you to determine the orientation in space. It has built-in impact detection, activity detection, a pedometer, and a programmable state machine and a machine learning module that can perform basic gesture recognition. It will work, among others in projects of mobile robots or flying objects (UAV). The module is compatible with 3.3 V and 5 V controllers, and communication takes place via the I2C interface (STEMMA QT connector) or SPI. The LSM6DSOX chip also supports the MIPI I3C interface. Full documentation is available on the product page.
Features
LSM6DSOX
- 3D accelerometer with a measuring range of ± 2, ± 4, ± 8, ± 16 g
- 3D gyroscope with a measuring range of ± 125, ± 250, ± 500, ± 1000, ± 2000 dps
- LIS3MDL Update Rate: 0.625Hz to 1000Hz
- Pedometer
- Motion detection, tilt detection
- Standard interrupts: free fall, 6D / 4D orientation, impact and double tap
- Programmable state machine: accelerometer, gyro and external sensors
- Built-in machine learning module
- Built-in temperature sensor
- I2C, SPI or MIPI I3C interface
- I2C address: 0x6A or 0x6B
LIS3MDL
- Measuring range: ± 4 / ± 8 / ± 12 / ± 16 gauss
- Update rate 0.625 to 1000 Hz
- Continuous and single conversion modes
- 16 bit data output
- Interrupt generator
- Self-test mode
- I2C / SPI interface
- I2C address: 0x1C or 0x1E
General
- Supply voltage: 3.3 V to 5 V
- Dimensions: 25.6 x 17.8 x 4.6 mm
Kit contains
- STEMMA QT LSM6DSOX + LIS3MDL 9 DoF
- 14-pin goldpin male connector
587285
Data sheet
- Interface
- I2C/SPI/I3C
- Type of sensor
- LSM6DSOX
- Module type
- 9DoF
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Akcelerometr, żyroskop i magnetometr
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
zł5.30
24h
Available quantity: 6
Available
4-wire cable with a length of 100 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4210
zł5.29
24h
Available quantity: 86
Available
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
zł7.47
24h
Available quantity: 2
Available
4-core cable with a length of 300 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5384
zł7.11
24h
Available quantity: 8
Available
4-core cable with a length of 400 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5385
zł7.68
24h
Available quantity: 1
Available
Other products in the same category (16)
Versatile 9DOF sensor with accelerometer, magnetometer and gyroscope, supporting I²C and SPI interfaces, enabling precise measurement of motion, orientation and temperature, with easy integration with Arduino and microcontrollers. Adafruit 3387
zł115.28
24h
Available quantity: 1
Available
Module with a sensor for use in the field of virtual reality (VR). It is based on the BNO086 system, which integrates an accelerometer, gyroscope, magnetometer and a microcontroller with an ARM Cortex M0+ core. SparkFun SEN-22857
zł191.67
3 weeks
No product available!
BMI270 3-axis accelerometer and gyroscope module. The chip is a low-power IMU optimised for wearables, providing precise acceleration measurement, angular velocity measurement and motion-triggered interrupt functions. Equipped with a Qwiic connector, it communicates via an I2C interface. SparkFun SEN-22397
zł90.18
24h
Available quantity: 2
Available
Module with 9-axis IMU BMX160 sensor (accelerometer, gyroscope and magnetomet) and BMP388 pressure/temperature sensor. Communication via the I2C interface. DFRobot SEN0252
zł99.30
24h
Available quantity: 1
Available
Module with 9-axis IMU ICM-20948 sensor (3-axis accelerometer, gyroscope and magnetometer and DMP) and BMP280 pressure sensor. Communication via I2C. Waveshare 10 DOF IMU Sensor (D)
zł434.98
4 weeks
No product available!
The Digilent Pmod NAV uses the LSM9DS1 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, plus the LPS25HB digital barometer to provide users with 10-DOF functionality. Digilent 410-326
zł262.11
3 weeks
No product available!
A module with an acceleration and rotational speed sensor based on the ICG-20660L system. It communicates via the I2C or SPI interface. DFRobot SEN0443
zł114.13
24h
Available quantity: 3
Available
Module with 9-axis IMU sensor BNO055. It has a built-in processing chip that returns orientation in 3D space. Communicates via I2C. Adafruit 4646
zł161.55
24h
Available quantity: 6
Available
Module with acceleration and rotational speed sensor based on the MPU-6050 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 3886
zł73.44
24h
Available quantity: 2
Available
Module with 6-axis IMU LSM6DSO sensor, which combines a 3-axis accelerometer and gyroscope, as well as a 9kB FIFO buffer and event handling functions. Communicates via I2C or SPI. SparkFun SEN-18020
zł79.36
24h
Available quantity: 1
Available
Module with 3-axis accelerometer and gyroscope LSM6DSV16X. The chip is a low-power IMU optimized for IoT devices with data processing capabilities using machine learning. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-21336
zł95.10
24h
Available quantity: 1
Available
Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP. Communication via I2C or SPI. Adafruit 4554
zł78.45
24h
Available quantity: 9
Available
A compact 9-DOF sensor that combines a 3-axis accelerometer, magnetometer, and gyroscope to precisely determine an object\'s orientation. With support for the I2C/SPI bus, compatibility with the STEMMA QT system, and 3V/5V power supply, it is suitable for robotics, 3D navigation, VR, AR, and stabilization systems. Adafruit 4634
zł235.56
4 weeks
No product available!
Module with acceleration and rotational speed sensor based on the MPU6050 system. It communicates via the I2C or UART interface
zł50.57
24h
Available quantity: 2
Available
Module with a 9-axis IMU sensor, which combines an accelerometer and a gyroscope (ICM20600 system) and a magnetometer (AK09918 system). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020585
zł58.36
24h
Available quantity: 2
Available
Module with 9-axis IMU ICM-20948 sensor. The chip is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP (Digital Motion Processor). Communication via I2C or SPI. SparkFun SEN-15335
zł112.84
24h
Available quantity: 4
Available
A module with an acceleration and rotational speed sensor based on the LSM6DSOX system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C, SPI or I3C interface. Adafruit 4517