ISM330DHCX + LIS3MDL FeatherWing - module with ISM330DHCX and LIS3MDL sensor for Feather
ID: 587328
5906623430857
zł162.50
Tax included
zł132.11 tax excl.
Module with 9-axis IMU dedicated to Feather plates. It connects the ISM330DHCX (accelerometer and gyroscope) and LIS3MDL (magnetometer) systems. Communication via the I2C interface. Adafruit 4569
Description
Module with a 9-axis IMU that combines the ISM330DHCX (accelerometer and gyro) and LIS3MDL (magnetometer). It is dedicated to Feather tiles. The ISM330DHCX sensor provides high performance with very low power consumption and measures acceleration in the range of ±2 / ±4 / ±8 / ±16g and angular velocity in the range of ± 125 / ±250 / ±500 / ±1000 / ±2000 / ±4000dps . It also comes with a set of built-in features including machine learning, programmable FSM, FIFO, sensor hub, event and interrupt decoding. The LIS3MDL sensor can measure magnetic field strength over the full scale range of ±4 / ±8 / ±12 / ±16 Gauss with a resolution of 16 bits. Communication with the module can be realized via the I2C interface. A guide with examples is available on the product page.
Features
- ISM330DHCX:
- Accelerometer measuring scale: ± 2g / ± 4g / ± 8g / ± 16g
- Gyro measurement scale: ± 125 / ± 250 / ± 500 / ± 1000 / ± 2000 / ± 4000 dps
- 16 bit data output
- I2C interface
- I2C address: 0x6B (default), 0x6A
- Data transmission frequency: from 12.5 Hz to 6.7 kHz for the accelerometer and from 1.6 Hz to 6.7 kHz for the gyroscope
- Working temperature: -40 to + 105 ° C
- Temperature compensation
- I2C sensor hub function
- Built-in FIFO up to 9 kB
- Machine learning function
- Built-in functions and interruptions: tilt detection, free fall, wake up, 6D / 4D orientation, click and double click
- Built-in pedometer
- MMC5983MA
- Measuring range: ± 4 / ± 8 / ± 12 / ± 16 gauss
- Update rate 0.625 to 1000 Hz
- Continuous and single conversion modes
- 16 bit data output
- Interrupt generator
- Self-test mode
- I2C interface
- I2C address: 0x1C or 0x1E
Kit contains
- ISM330DHCX + LIS3MDL FeatherWing
- 2 x goldpin 16-pin
587328
Data sheet
- Interface
- I2C
- Type of sensor
- ISM330DHCX
- Module type
- 9DoF
- Power supply voltage
- 3,3 V
- Sensor type
- Akcelerometr, żyroskop i magnetometr
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Plate from the Adafruit Feather series equipped with an ATmega32u4 microcontroller and a small prototype surface (5x7). The chip contains 32KB flash memory, 2KB RAM memory and built-in USB support. The plate is compatible with Arduino. Adafruit 2771
zł117.62
24h
Available quantity: 2
Available
Adafruit Feather HUZZAH ESP8266 is a new development board from Adafruit with a built-in WiFi module ESP8266. Processor frequency: 80 MHz, USB-serial TTL CP2104 converter, Li-Pol battery charger. Adafruit 2821
zł90.18
24h
Available quantity: 1
Available
Low-power, 2.4GHz spectrum wireless protocol that you can use with iOS without needing special certification. Supported by all modern smart phones - excellent for use in portable projects that will make use of an iOS or Android phone or tablet; it also is supported in Mac OS X and Windows 8+. Adafruit 2995
zł155.48
Delivery date unknown
No product available!
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3010
zł261.29
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with 9-axis IMU ICM-20948 sensor (3-axis accelerometer, gyroscope and magnetometer and DMP) and BMP280 pressure sensor. Communication via I2C. Waveshare 10 DOF IMU Sensor (D)
zł434.98
4 weeks
No product available!
6DoF module with MPU6050 (3-axis accelerometer, 3-axis gyroscope) powered with 3-5V. I2C communication interface
zł12.30
4 weeks
No product available!
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer
zł31.03
24h
Available quantity: 10
Available
Module with a 9-axis IMU sensor, which combines an accelerometer and a gyroscope (ICM20600 system) and a magnetometer (AK09918 system). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020585
zł57.91
24h
Available quantity: 2
Available
GY-9250 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9250 chip. It has a built-in gyroscope, accelerometer and magnetometer.
zł35.17
4 weeks
No product available!
The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through I²C and SPI interfaces.
zł72.02
24h
Available quantity: 1
Available
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-20176
zł202.72
3 weeks
No product available!
A module with an acceleration and rotational speed sensor based on the LSM6DS3TR-C system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 5543
zł103.31
4 weeks
No product available!
A module with an acceleration and rotational speed sensor based on the LSM6DSOX system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C, SPI or I3C interface. Adafruit 4517
zł103.46
24h
Available quantity: 2
Available
GY-801 is a 9DOF IMU module with L3G4200D, ADXL345, MMC5883MA and BMP180 systems. It allows you to measure the movement of the object and atmospheric pressure.
zł128.03
24h
Available quantity: 2
Available
A module with an acceleration and rotational speed sensor based on the MPU-6050 system. It communicates via the I2C interface. DFRobot SEN0142
zł62.43
24h
Available quantity: 6
Available
BMI270 3-axis accelerometer and gyroscope module. The chip is a low-power IMU optimised for wearables, providing precise acceleration measurement, angular velocity measurement and motion-triggered interrupt functions. Equipped with a Qwiic connector, it communicates via an I2C interface. SparkFun SEN-22398
zł82.32
24h
Available quantity: 2
Available
KAmodLSM303C is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes
zł37.90
24h
Available quantity: 406
Available
Module with a sensor for use in the field of virtual reality (VR). It is based on the BNO086 system, which integrates an accelerometer, gyroscope, magnetometer and a microcontroller with an ARM Cortex M0+ core. SparkFun SEN-22857
zł190.15
24h
Available quantity: 1
Available
Module with acceleration and rotational speed sensor based on the MPU-6050 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 3886
zł73.44
4 weeks
No product available!
BMI270 3-axis accelerometer and gyroscope module. The chip is a low-power IMU optimised for wearables, providing precise acceleration measurement, angular velocity measurement and motion-triggered interrupt functions. Equipped with a Qwiic connector, it communicates via an I2C interface. SparkFun SEN-22397
zł90.18
24h
Available quantity: 1
Available
Module with 9-axis IMU dedicated to Feather plates. It connects the ISM330DHCX (accelerometer and gyroscope) and LIS3MDL (magnetometer) systems. Communication via the I2C interface. Adafruit 4569