Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500
ID: 560969
5906623429103
zł261.29
Tax included
zł212.43 tax excl.
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3010
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Compatible with the 802.11b / g / n standard, it uses the SPI interface for communication. It has support for WEP, WPA, WPA2 security.
Built-in lithium-polymer battery connector and charger module enable connection of a 500 mAh Li-Pol battery . The battery is charged via the mounted USB connector.
properties
- Microcontroller: 32-bit ATSAMD21G18 ARM Cortex M0:
- Frequency: 48 MHz
- 256 kB of Flash memory
- 32 kB of RAM
- Built-in Atmel ATWINC1500 WiFi module from Atmel:
- Compliance with the 802.11b / g / n standard
- Interface: SPI
- Support for WEP, WPA, WPA2
- Power supply via USB (5 V) or Li-Pol (3.7 V) battery (no battery included)
- Built-in Li-Pol battery charger with 200 mA capacity with diode informing about the status
- 20 GPIO pins
- 8 PWM pins
- 10 analog inputs
- 1 analogue output
- Hardware interface support: SPI, I2C, UART
- 4 mounting holes
- Reset button
- Dimensions: 53.6 x 23 x 8 mm without solder connections)
- Weight: 6.1 g
Included
- ATSAMD21 + ATWINC1500 module
- Men's pin connectors
560969
Data sheet
- Microcontroller
- ATSAMD21G18
- Flash memory
- 256kB
- Number of I/O
- 20
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 53,6 mm
- Width
- 23 mm
- USB connector type
- microUSB type B
You might also like
Adafruit Feather HUZZAH ESP8266 is a new development board from Adafruit with a built-in WiFi module ESP8266. Processor frequency: 80 MHz, USB-serial TTL CP2104 converter, Li-Pol battery charger. Adafruit 2821
zł96.57
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 4
Available
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3061
zł206.07
Delivery date unknown
No product available!
Other products in the same category (16)
Adafruit Feather nRF52840 Express is an advanced development board with Bluetooth LE and native USB, perfect for mobile and portable applications. With ample memory, support for CircuitPython and Arduino IDE, and numerous interfaces, it is an excellent tool for creating advanced projects. Adafruit 4062
zł148.60
24h
Available quantity: 1
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł113.95
4 weeks
No product available!
Module with ATSAMD21G18 microcontroller and 900 MHz wireless transceiver. The module can be used for transmission in the ISM 868 MHz band after the appropriate software configuration. The ATSAMD21G18 microcontroller (ARM Cortex-M0) is clocked at 48 MHz and operates at 3.3 V. Adafruit 3176
zł147.12
24h
Available quantity: 1
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
zł99.36
24h
Available quantity: 3
Available
A board with an RP2040 microcontroller and a LoRa RF95 module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and STEMMA QT connector. Ideal for IoT projects. Adafruit 5714
zł175.46
24h
Available quantity: 3
Available
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
zł121.44
24h
Available quantity: 5
Available
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
zł82.45
24h
Available quantity: 1
Available
Development board with ESP8266 microcontroller with built-in Wi-Fi communication. The system is clocked at 80 MHz and powered by 3.3 V. It includes a Tensillica core and a full Wi-Fi stack. Adafruit 3046
zł111.73
24h
Available quantity: 3
Available
Adafruit Feather 328P is a module with a built-in ATmega 328P AVR microcontroller (8MHz, 32kB Flash, 2kB RAM). The board is compatible with Arduino IDE, has small dimensions and low weight, and the built-in USB connector allows programming and debugging. Adafruit 3458
zł73.70
24h
Available quantity: 2
Available
The board is equipped with the ATSAMD51J19 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins, connector for connecting the battery with the charging circuit. Adafruit 3857
zł150.66
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
zł144.23
24h
Available quantity: 2
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. The board has soldered goldpin connectors. Adafruit 3591
zł152.38
6 weeks
No product available!
Development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The module also has an RFM69HCW chip that allows wireless communication in the 433 MHz band. Adafruit 3177
zł147.12
4 weeks
No product available!
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3061
zł206.07
4 weeks
No product available!
Adafruit Feather HUZZAH ESP8266 is a new development board from Adafruit with a built-in WiFi module ESP8266. Processor frequency: 80 MHz, USB-serial TTL CP2104 converter, Li-Pol battery charger. Adafruit 2821
zł96.57
24h
Available quantity: 1
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5399
zł140.99
24h
Available quantity: 1
Available
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3010