Qwiic Micro 6DoF IMU - a module with a 3-axis accelerometer and a gyroscope ISM330DHCX
ID: 1181126
5906623477586
zł202.72
Tax included
zł164.81 tax excl.
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-20176
Description
Module with a 3-axis accelerometer and an industrial-grade ISM330DHCX gyroscope. It has a user selectable measuring range of ±2g/±4g/±8g/±16g for the accelerometer and ±125/±250/±500/±1000/±2000/±4000 dps for the gyro. It is able to measure accelerations with a data rate of 12.5 Hz to 6.7 kHz and angular velocity with a frequency of 1.6 Hz to 6.7 kHz. The sensor is equipped with a calibration and compensation circuit which ensures excellent performance in a wide temperature range from -40 to +105 °C. It is powered with the voltage 3.3 V, and communication takes place via the I2C interface (Qwiic connector) or SPI. Full documentation and examples of use are available on the product page.
Features
- Accelerometer measuring scale: ±2g/±4g/±8g/±16g
- Gyro measurement scale: ±125/±250/±500/±1000/±2000/±4000 dps
- 16 bit data output
- I2C or SPI interface
- I2C address: 0x6B (default), 0x6A
- Data transmission frequency: from 12.5 Hz to 6.7 kHz for the accelerometer and from 1.6 Hz to 6.7 kHz for the gyroscope
- Working temperature: -40 to + 105°C
- Temperature compensation
- I2C sensor hub function
- Built-in FIFO up to 9 kB
- Machine learning function
- Built-in functions and interruptions: tilt detection, free fall, wake up, 6D / 4D orientation, click and double click
- Built-in pedometer
- 2 x Qwiic connectors
- Working voltage: 3.3V
1181126
Data sheet
- Interface
- I2C
- Type of sensor
- ISM330DHCX
- Module type
- 6DoF
- Power supply voltage
- 1,71 - 3
- Sensor type
- Akcelerometr i żyroskop
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł10.47
24h
Available quantity: 15
Available
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.10
24h
Available quantity: 25
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.56
24h
Available quantity: 22
Available
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C or SPI interface. SparkFun SEN-19764
zł156.95
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with 9-axis IMU. It combines the ISM330DHCX (accelerometer and gyroscope) and MMC5983MA (magnetometer) systems. Communication via the I2C interface. SparkFun SEN-19895
zł220.29
24h
Available quantity: 1
Available
A compact 9-DOF sensor that combines a 3-axis accelerometer, magnetometer, and gyroscope to precisely determine an object\'s orientation. With support for the I2C/SPI bus, compatibility with the STEMMA QT system, and 3V/5V power supply, it is suitable for robotics, 3D navigation, VR, AR, and stabilization systems. Adafruit 4634
zł235.56
4 weeks
No product available!
Versatile 9DOF sensor with accelerometer, magnetometer and gyroscope, supporting I²C and SPI interfaces, enabling precise measurement of motion, orientation and temperature, with easy integration with Arduino and microcontrollers. Adafruit 3387
zł115.28
4 weeks
No product available!
Sensor module for use in the area of virtual reality (VR). It was based on the BNO080 chip, which integrates the accelerometer, gyroscope and magnetometer with the ARM Cortex M0+ microcontroller. SparkFun SEN-14686
zł245.19
3 weeks
No product available!
The UM7-LT orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. This LT version of the UM7 does not have an enclosure.
zł734.94
24h
Available quantity: 1
Available
GY-9255 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9255 chip. It has a built-in gyroscope, accelerometer and magnetometer
zł60.91
4 weeks
No product available!
Module with 9-axis IMU ICM-20948 sensor. The chip is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP (Digital Motion Processor). Communication via I2C or SPI. SparkFun SEN-15335
zł112.80
24h
Available quantity: 6
Available
Module with LSM6DS3 sensor that combines a 3-axis accelerometer and a 3-axis gyroscope. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020012
zł56.22
24h
Available quantity: 1
Available
BMI270 3-axis accelerometer and gyroscope module. The chip is a low-power IMU optimised for wearables, providing precise acceleration measurement, angular velocity measurement and motion-triggered interrupt functions. Equipped with a Qwiic connector, it communicates via an I2C interface. SparkFun SEN-22398
zł82.32
24h
Available quantity: 2
Available
Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP. Communication via I2C or SPI. Adafruit 4554
zł78.87
24h
Available quantity: 10
Available
Module with a sensor for use in the field of virtual reality (VR). It is based on the BNO086 system, which integrates an accelerometer, gyroscope, magnetometer and a microcontroller with an ARM Cortex M0+ core. SparkFun SEN-22857
zł190.15
24h
Available quantity: 1
Available
An IMU module that adds a full 9-axis sensor suite to Feather boards for motion and orientation measurement. It combines an accelerometer, gyroscope, and magnetometer, providing stable and accurate data ideal for robotics, stabilization, wearables, and 3D motion analysis. The module communicates via I2C and features a STEMMA QT port for easy integration and solderless connection of additional sensors. Adafruit 4565
zł100.61
24h
Available quantity: 1
Available
BMI270 3-axis accelerometer and gyroscope module. The chip is a low-power IMU optimised for wearables, providing precise acceleration measurement, angular velocity measurement and motion-triggered interrupt functions. Equipped with a Qwiic connector, it communicates via an I2C interface. SparkFun SEN-22397
zł90.18
3 weeks
No product available!
GY-9250 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9250 chip. It has a built-in gyroscope, accelerometer and magnetometer.
zł35.17
4 weeks
No product available!
Small 9 DoF IMU module with 3-axis gyroscope and accelerometer (LSM6DSO) and 3-axis magnetometer (LIS3MDL). It is equipped with an I2C interface, a voltage stabilizer and a logic level converter. Pololu 2862
zł108.93
24h
Available quantity: 1
Available
Module with acceleration and rotational speed sensor based on the LSM6DSO32 chip. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4692
zł72.24
24h
Available quantity: 1
Available
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-20176