STEMMA QT PMSA003I Air Quality - module with air quality sensor
ID: 587278
5906623430475
zł228.94
Tax included
zł186.13 tax excl.
Air quality sensor module PMSA003I. It allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. Adafruit 4632
Description
Air quality sensor module PMSA003I. It uses the laser scattering technique and allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. It can work with systems with a working voltage of 3.3 V or 5 V, and communication is via the I2C interface (STEMMA QT connector). It will be used in air treatment devices and air quality monitors. Full documentation with examples is available on the product page.
Features
- Particle measurement range: 0.3 to 1.0, 1.0 to 2.5, 2.5 to 10 µm
- Particle counting efficiency: 50% at 0.3 μm 98% at> = 0.5 μm
- Effective range (PM2.5 standard): 0 to 500 µg / m³
- Maximum range (PM2.5 standard): ≥ 1000 µg / m³
- Resolution: 1 µg / m³
- Maximum particle consistency error (PM2.5 standard): ± 10% @ 100 to 500 μg / m³, ± 10 μg / m³ @ 0 ~ 100 μg / m³
- Standard particle volume 0.1 L
- Single response time 1 second
- Total response time ≤ 10 seconds
- DC power supply Type: 5.0 V Min: 4.5 V Max: 5.5 V
- Active current ≤ 100 mA
- Standby current ≤ 200 μA
- Interface voltage: 3.3V logic, L <0.8V, H> 2.7V
- Operating temperature range -10 to 60 ℃
- Operating humidity range 0 to 99%
- Storage temperature range -40 to 80 ℃
- MTTF ≥ 3 years
- I2C interface (address 0x12)
- Voltage: 3.3V or 5V
- STEMMA QT connector
- Dimensions: 51 x 35.5 x 13.6 mm
Kit contains
- STEMMA QT PMSA003I Air Quality
- 8-pin straight male goldpin connector
587278
Data sheet
- Interface
- I2C
- Type of sensor
- PMSA003
- Power supply voltage
- 3,3 - 5 V
- Concentration measurement
- PM1.0/PM2.5/PM10
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
zł51.89
Delivery date unknown
No product available!
Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392
zł82.10
Delivery date unknown
No product available!
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.35
24h
Available quantity: 17
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.96
24h
Available quantity: 9
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł79.42
Delivery date unknown
No product available!
Other products in the same category (16)
BME680 integrated gas, pressure, temperature and humidity sensor module housed in a single MEMS housing. It is equipped with an I2C and SPI interface. Waveshare BME680 Environmental Sensor
zł57.75
4 weeks
No product available!
Laser sensor of air pollution with PM2,5 and PM10 particles. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. The data is output to the UART interface and via the PWM signal. Nova Fitness SDS018
zł147.14
24h
Available quantity: 2
Available
Indoor air quality measurement module, combining two high-end Sensirion sensors – SCD41 and SEN55. It offers a comprehensive set of measurements, including CO2 concentration, volatile organic compounds (VOC), suspended dust (PM1.0, PM2.5, PM4, PM10), as well as temperature and relative humidity. SparkFun SEN-25200
zł709.81
3 weeks
No product available!
Laser sensor of air pollution with PM2,5 and PM10 particles. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. The data is output to the UART interface and via the PWM signal. The set includes a UART-USB converter. Nova Fitness SDS011
zł158.55
4 weeks
No product available!
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply. Seeed Studio 101020078
zł58.12
24h
Available quantity: 3
Available
PMS7003 is a kind of digital and universal particle concentration sensor, which can be used to obtain the number of suspended particles in the air, i.e. the concentration of particles, and output them in the form of digital interface
zł107.07
4 weeks
No product available!
Bosch environmental sensor that measures temperature, humidity, pressure and air quality based on gas analysis (VOC, VSC, CO, H₂). It is characterized by low power consumption, high resistance to moisture and the ability to train AI algorithms to identify specific pollutants. It is compatible with Raspberry Pi, Raspberry Pi Pico, Breakout Garden and Qwiic/STEMMA QT systems, which allows easy integration without soldering. Pimoroni PIM769
zł142.93
4 weeks
No product available!
SenseCAP CO2, Temperature and Humidity Sensor - CO2, temperature and humidity sensor with RS485 &...
Digital sensor dedicated to measuring carbon dioxide (CO2), air temperature and relative humidity. High performance, fast response and excellent stability make it an ideal solution for a variety of applications such as greenhouses, cities, poultry farms and transport stations. Seeed Studio 101991029
zł379.00
4 weeks
No product available!
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł79.42
4 weeks
No product available!
The PMSA003 air quality sensor module is designed for the Raspberry Pi. It allows you to analyze the amount of pollutants based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 20768
zł247.80
24h
Available quantity: 1
Available
Wireless sensor with LoRaWAN network communication. Dedicated to long-distance industrial data acquisition with a wide measurement range of CO2 from 400 to 10000 ppm, temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992869
Regular pricezł748.37zł639.60
24h
Available quantity: 1
Available
Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. PMS3003
zł95.25
24h
Available quantity: 38
Available
BME688 integrated gas, pressure, temperature and humidity sensor module in a single MEMS housing. It is equipped with an I2C and SPI interface. It has built-in AI functions. Waveshare BME688 Environmental Sensor
zł102.93
4 weeks
No product available!
Module with a BME688 sensor for measuring gas concentration, pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-19096
zł196.21
24h
Available quantity: 3
Available
Laser dust sensor is a digital universal particle concentration sensor,it can be used to obtain the number of suspended particulate matter in a unit volume of air within 0.3 to 10 microns, namely the concentration of particulate matter, and output with digital interface, also can output quality data of per particle. DFRobot SEN0177
zł260.24
24h
Available quantity: 4
Available
An optical particle sensor that uses laser scattering and Sensirion\'s innovative contamination resistance technology. It enables users to measure mass concentration and particle number. SparkFun SEN-15103
zł179.00
24h
Available quantity: 2
Available
Air quality sensor module PMSA003I. It allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. Adafruit 4632