Qwiic Humidity Sensor Breakout - module with SHTC3 humidity and temperature sensor
ID: 581487
5906623420360
zł53.92
Tax included
zł43.84 tax excl.
Module with a digital temperature and humidity sensor based on the SHTC3 system. Communication takes place via the I2C interface. SparkFun SEN-16467
Description
Module with a digital temperature and humidity sensor based on the SHTC3 system by Sensirion. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. It is characterized by a wide range of supply voltage (1.62 V to 3.6 V) and high accuracy (± 2% RH, ± 0.2°C). Communication takes place via the I2C interface. On the product page there is a guide and the Arduino library.
Features
- Uses I2C interface (Qwiic-enabled)
- I2C Address: 0x70
- 2x Qwiic Connectors
- Operating voltage range
- 1.62V - 3.6 V
- Typically 3.3V if using the Qwiic cable
- Relative Humidity
- Operating range: 0% to 100%
- Typical accuracy: ±2 %RH
- Resolution: 0.01 %RH
- Temperature
- Operating range: -40°C to +125 °C
- Typical accuracy: ±0.2 °C
- Resolution: 0.01 °C
- Typical current consumption (varies based on mode)
- 4.9µA to 430µA (Normal Mode)
- 0.5µA to 270µA (Low Power Mode)
581487
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.50
24h
Available quantity: 26
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.90
24h
Available quantity: 10
Available
Other products in the same category (16)
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
zł132.32
24h
Available quantity: 2
Available
Module with a digital temperature and humidity sensor based on the SHTC3 system. Communication takes place via the I2C interface. SparkFun SEN-16467
zł53.92
24h
Available quantity: 2
Available
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
zł109.00
24h
Available quantity: 3
Available
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440
zł84.89
24h
Available quantity: 3
Available
Module with a temperature and humidity sensor DHT22. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80℃. DFRobot SEN0137
zł43.51
24h
Available quantity: 3
Available
Module with a steam sensor. It can be supplied with the voltage of 3.3 V or 5 V. It has an analog output. DFRobot SEN0121
zł6.21
24h
Available quantity: 3
Available
Module with temperature and humidity sensor DHT11. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020011
zł21.66
24h
Available quantity: 2
Available
A module with an AHT20 industrial grade temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101990644
zł41.98
24h
Available quantity: 2
Available
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634
zł296.82
24h
Available quantity: 1
Available
Module with SHT35 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020592
zł63.76
24h
Available quantity: 1
Available
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
zł103.57
24h
Available quantity: 3
Available
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
zł50.12
24h
Available quantity: 2
Available
Digital Temperature & Humidity Sensor - SHT10 temperature and humidity sensor with a stainless probe
Temperature and humidity sensor SHT10 with a stainless probe. Provides high temperature and pressure resistance. DFRobot SEN0148
zł163.41
4 weeks
No product available!
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
zł79.85
24h
Available quantity: 1
Available
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
zł159.90
2 weeks
No product available!
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
zł815.50
3 weeks
No product available!
Module with a digital temperature and humidity sensor based on the SHTC3 system. Communication takes place via the I2C interface. SparkFun SEN-16467