Qwiic Air Quality Sensor - module with SGP40 air quality sensor
ID: 586702
5906623418985
zł95.23
Tax included
zł77.42 tax excl.
Air quality sensor module based on the SGP40 system. The board is equipped with Qwiic connectors. SparkFun SEN-18345
Description
Air quality sensor module based on the SGP40 system. The sensor is based on CMOSens® technology by Sensirion and uses a metal oxide (MOx) sensor. Provides indoor air quality information based on volatile organic compounds (VOC) with humidity compensation. Both the sensing element and the VOC algorithm are highly resistant to contaminating gases present in real-world applications, allowing long-term stability as well as low drift. SGP40 does not return specified concentrations or VOC gases. Instead, it generates a digital value based on typical VOC gases present in the indoor environment and this value can be combined with Sensirion's VOC index algorithm to detect the relative intensity of VOC events in relation to the average readings over a 24 hour period. SGP40 communicates via the I2C interface available on the Qwiic connector. Full documentation with examples of use is available in the guide.
Features
- Uses I2C interface (Qwiic-enabled)
- I2C Address: 0x59
- 2x Qwiic connectors
- Operating voltage range:
- 1.7V - 3.6V (Typ. 3.3V)
- The Qwiic interface provides 3.3V
- Typical current consumption:
- 2.6mA during continuous operation (at 3.3V)
- 34µA when idle (heater off)
- Output signal:
- Digital raw value (SRAW): 0 - 65535 ticks
- Digital processed value (VOC Index): 0 - 500 VOC Index points
- Switch-on behavior:
- Time until reliably detecting VOC events: <60s
- Time until specifications are met: <1h
- Recommended sampling interval:
- VOC Index: 1s
- SRAW: 0.5s - 10s (Typ. 1s)
586702
Data sheet
- Interface
- I2C
- Type of sensor
- SGP40
- Power supply voltage
- 1.7..3.6V
- Concentration measurement
- pozostałych gazów
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł11.94
24h
Available quantity: 1
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.50
24h
Available quantity: 36
Available
Flexible 4-core cable, 500 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17257
zł13.90
24h
Available quantity: 4
Available
Other products in the same category (16)
Available
Available
Available
Available
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g. There are two Qwiic connectors on the board and holes with 2.54 mm raster. SparkFun SEN-14587
zł73.01
24h
Available quantity: 1
Available
Module with an infrared sensor AMG8833 - a measurement matrix with a resolution of 64 pixels (8x8). It offers an accuracy of 2.5°C and the ability to detect people at a distance of up to 7 m. Communication with the sensor is via the I2C interface. SparkFun SEN-14607
zł274.11
24h
Available quantity: 1
Available
A small module with a 3-axis magnetometer based on the Melexis MLX90393 system. Its resolution is 0.161 μT. I2C or SPI interface is used for communication. The I2C interface has been derived on connectors compatible with the Qwiic standard. SparkFun SEN-14571
zł97.92
24h
Available quantity: 1
Available
Sensor module for use in the area of virtual reality (VR). It was based on the BNO080 chip, which integrates the accelerometer, gyroscope and magnetometer with the ARM Cortex M0+ microcontroller. SparkFun SEN-14686
zł245.19
3 weeks
No product available!
Module with EEPROM memory, capacity 512 kbit (64kB). Communication takes place via the I2C interface. The module has 3 jumpers that enable selection of one of 8 addresses. SparkFun SPX-14764
Regular pricezł89.58zł64.58
24h
Available quantity: 4
Available
Module with a deflection sensor with two measuring probes. The board houses the ADS1015 converter, which is an ADC converter with an output in the form of an I2C interface. SparkFun SEN-14666
zł370.72
3 weeks
No product available!
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 55x35°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14844
zł504.44
3 weeks
No product available!
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 110x75°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14843
zł393.59
3 weeks
No product available!
GPS module with 72-channel GNSS NEO-M8P-2 receiver. It can receive data from GPS, GLONASS and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 25mm. SparkFun GPS-15005
zł1,671.85
3 weeks
No product available!
TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Sparkfun SEN-14786
zł321.17
3 weeks
No product available!
Shield designed for IoT applications with LTE CAT M1/NB-IoT SARA-R4 modem. The board is compatible with Arduino, allows you to add communication via cellular networks to Arduino boards. SparkFun CEL-14997
zł720.77
24h
Available quantity: 1
Available
Module with a digital rotary encoder controlled by the I2C interface. The potentiometer has RGB LED backlight. The encoder generates post-movement information with 24 levels per revolution and rotation direction detection. SparkFun DEV-15083
zł118.72
24h
Available quantity: 1
Available
Air quality sensor module based on the SGP40 system. The board is equipped with Qwiic connectors. SparkFun SEN-18345